|
Garelick
Outboard Motor Bracket
Product Available:
yes
Sku Number:
366480531
Manufacturer ID:
71056:01
UPC Number:
038203710563 |
$
183.99 |
|
|
Outboard Motor Bracket 4 position, all stainless outboard bracket is perfect for salt water and other abusive environments. Handles outboards 7.5 to 20 Horsepower up to 115 lbs. Mounting hardware and instructions included. 
|
|
|
S-J-Products
Offshore Motor Bracket 25Hp
Product Available:
yes
Sku Number:
366480903
Manufacturer ID:
71091:01
UPC Number:
|
$
417.99 |
|
|
Offshore Motor Bracket 25Hp Part - 710910 
|
|
|
Minn-Kota
Shear Pins - Brass - Qty 2
Product Available:
yes
Sku Number:
368470019msk
Manufacturer ID:
UPC Number:
|
$
2.99 |
|
|
Shear Pins - Brass - Qty 2 Stainless and brass shear pins available in a wide variety to fit most outboards and out drives. Consult your owner's manual for sizing. Cotter pin included.Material :Brass Qty : 2 
|
|
|
S-J-Products
Maxxum Pro Freshwater Bow Mount Trolling Motors, 101 Lbs. Thrust
Product Available:
yes
Sku Number:
369632831msk
Manufacturer ID:
UPC Number:
|
$
1119.99 |
|
|
Maxxum Pro Freshwater Bow Mount Trolling Motors, 101 Lbs. Thrust For tournament anglers and hard-core fishermen who spend dawn to dusk on the water, everything comes down to catching more fish. Braggin' rights. Bigger paydays. More trophies. The Maxxum Pro, with Minn Kota exclusive Lift-Assist stow and deploy, makes the job of lifting your trolling motor in and out of the water easier than ever before. That's why Minn Kota is the first choice of more serious anglers than any other trolling motor. Spend less effort on your trolling motor and more effort on putting weight in the livewell.Exclusive Lift-Assist - Cuts the weight of stowing and deploying your trolling motor by 50%. Heavy-duty gas-charged spring makes lifting your motor in and out of the water as easy as your SUV tailgate. Smooth, easy and extra quiet.Optional Universal Sonar - An integrated and protected transducer in the lower unit of the motor offers plug-in compatibility with your favorite brand of fish-finding equipment.Streamlined Foot Pedal - Puts you in complete control. Easy to use and ergonomically-designed for all-day comfort. Heel/toe action provides reliable, responsive steering.Bowguard 360? Breakaway Mount - A Minn Kota exclusive! Breaks away on impact from any direction, protecting your motor, shaft and boat. Get uninterrupted fishing as the motor automatically resets itself. No more leaning over the bow of your boat on your hands and knees wrestling with resetting your motor.Maximizer - Get up to five times longer run time on a single charge. Maximizer technology controls the draw of power at infinitely variable speeds to conserve battery power and extend run time.Overload Sensing Circuitry - Protects your motor from overheating when accidentally engaged in the stowed position.Rock-Solid Maxxum Mount - The strongest bow-mount system in the world. Go for broke without worrying about breaking down. Stowed, the Maxxum Mount won't budge, flex or vibrate.Indestructible Composite Shaft - Guaranteed for Life! - Pound for pound, our ultra high-yield composite material has been tested to be three times the strength of steel. Virtually indestructible, it flexes on impact and then returns to its original position. Unlike steel, will not kink, break, rust or corrode. Guaranteed for life!Cool, Quiet Power - Minn Kota's larger brushes, windings and commutators generate less heat, less noise and run cooler?extending motor life and conserving battery power. You get greater sustained thrust and more time on the water. A unique bearing system produces low rpms/high torque to cut down on fish-spooking noise - so quiet they'll never hear you coming.Weedless Wedge 2 - The latest generation of this legendary design features swept-back and flared blades to "wedge" weeds away. Pass through the thick stuff without battery-draining "chopping and hacking." A Minn Kota exclusive. Shaft Lengths - Available in 42", 52" and 62" shaft lengths (ideal for deep-V hulls?keeps lower unit in the water unde
|
|
|
Garelick
Shear Pin
Product Available:
yes
Sku Number:
368470183msk
Manufacturer ID:
UPC Number:
|
$
2.99 |
|
|
Shear Pin Stainless shear pins available to fit most outboards and out drives. Consult your owner's manual for sizing. Cotter pin included.
|
|
|
Davis
Motor Carrier
Product Available:
yes
Sku Number:
366480457
Manufacturer ID:
31400:01
UPC Number:
038203314006 |
$
67.99 |
|
|
Motor Carrier Outboards motors were not designed to be carried by hand! They are awkward, bulky, and extremely heavy. Before you hurt yourself or your outboard, invest in a rolling motor carrier by Garelick. Made of sturdy corrosion resistant aluminum tubing, these carriers are great for storage and moving of outboard motors. Will hold any outboard up to 15 horsepower or 85 lbs. 
|
|
|
Garelick
Motor Caddy Hoisting Harness for 2-15 Horsepower Motors
Product Available:
yes
Sku Number:
366970465
Manufacturer ID:
430
UPC Number:
011698043002 |
$
26.99 |
|
|
Motor Caddy Hoisting Harness for 2-15 Horsepower Motors Davis sized the Motor Caddy for quick attachment to most outboards from 2-15 horsepower. This improved design features a longer strap to fit 4-stroke motors and an added security strap for today's streamlined engine cases. Made of UV resistant materials the Motor Caddy will endure the marine environment for those who prefer a semi-permanent installation. Glass filled nylon buckles insure that Motor Caddy is easy to install and remove. Makes lifting and moving cumbersome motors safer and simpler. Patented design.
|
|
|
Garelick
Heavy Duty Outboard Bracket 7.5-30
Product Available:
yes
Sku Number:
366480143
Manufacturer ID:
71090:01
UPC Number:
038203710907 |
$
299.99 |
|
|
Heavy Duty Outboard Bracket 7.5-30 Great for offshore and 4 strokes!Designed to handle 2 cycle and 4 stroke outboards from 7.5 to 30 horsepower, up to 169 lbs. Anodized aluminum body has torsion springs to counter balance the weight of larger outboards. Hardware and instructions included.
|
|
|
Tohatsu
Motor Tilter
Product Available:
yes
Sku Number:
366480622
Manufacturer ID:
71036:01
UPC Number:
038203710365 |
$
66.99 |
|
|
Motor Tilter The ideal leverage tool. Saves your back and allows you to tilt motor back safely when tilting motors without a power tilt. Adjusts to fit the shroud of any outboard up to 40 horse power. All contact points are cushioned so they won't scratch your motor's finish. Made of heavy gauge stainless steel and anodized aluminum tubing with durable aluminum castings. Bar is 20-1/2" L. Handle is 21-1/2" L.
|
|
|
Garelick
Safety Lanyard Cord
Product Available:
yes
Sku Number:
369105390
Manufacturer ID:
353068210M
UPC Number:
792379804258 |
$
11.99 |
|
|
Safety Lanyard Cord Necessary for the safe operation of your Tohatsu motor, this genuine factory direct replacement Safety Stop Lanyard cord fits all Tohatsu outboard mounted lanyard switches. Sh. Wt. 1 lb.
|
|
|
Tohatsu
Outboard Motor Bracket for 2 Stroke Motors
Product Available:
yes
Sku Number:
366480515
Manufacturer ID:
71057:01
UPC Number:
038203710570 |
$
154.99 |
|
|
Outboard Motor Bracket for 2 Stroke Motors Anodized aluminum 4 position bracket is perfect for trolling or auxiliary motors. Handles 7.5 to 20 horsepower outboards up to 115 lbs. Allows outboard to be retracted completely out of the way. Mounting hardware and instructions included.
|
|
|
CMC
8 Horsepower Four-Stroke Electric Start Outboard Motor - 20" Shaft - Boater's Price Busters - Free $100 Gift Coupon - Ends 6/15!
Product Available:
yes
Sku Number:
369105069
Manufacturer ID:
MFS8A3EFL
UPC Number:
|
$
1779.99 |
|
|
8 Horsepower Four-Stroke Electric Start Outboard Motor - 20" Shaft - Boater's Price Busters - Free $100 Gift Coupon - Ends 6/15! Lightest Weight 4-Stroke in its Class and one of the quietest rides on the water. Whether you need auxiliary power, primary power, or a kicker for backup, the Tohatsu 8 and 9.8- HP 4-strokes offer the power, fuel economy, and features you need. A dynamically balanced crankshaft and newly designed upper rubber mounts greatly reduce vibration to ensure smooth, stable running throughout the entire rpm range. The digital CD Ignition system produces quicker ignition timing response at any rpm and conditions, providing faster starts, quicker throttle response, and smoother trolling. A larger capacity air silencer greatly reduces induction noise. The fast-idle choke system on the carburetor eliminates the need for difficult choking techniques and enables simplistic starting, while the newly designed recoil starter has a larger starter reel making manual starting fast and easy. A wider cavitation plate for quicker planning and reduced slash. A sacrificial Anode trim tab on the gear case stabilizes steering torque for any running condition while also helping to protect the engine from electrolysis and corrosion. Geared with Forward, Neutral, and Reverse for convenient operation. 3.1 gallon external fuel tank included.* Please Note: Boats, kayaks, dinghies, canoes, and all gas motors cannot be returned to boatersworld.com. If these products are defective, you will need to contact the manufacturer.
|
|
|
St-Croix
MANUAL ML-65 POWER-LIFT TRANSOM JACK
Product Available:
yes
Sku Number:
368080628
Manufacturer ID:
65012
UPC Number:
|
$
279.99 |
|
|
MANUAL ML-65 POWER-LIFT TRANSOM JACK The Manual CMC Power Lift is constructed of extruded Aluminum alloy and fastened with stainless steel fasteners for maximum strength and durability. It utilizes an all thread stainless steel screw centrally located for uniform lift and positive alignment. Designed for outboards up to V-6's.
|
|
|
CMC
St. Croix Little Crane Cap
Product Available:
yes
Sku Number:
366980241msk
Manufacturer ID:
UPC Number:
|
$
465.00 |
|
|
St. Croix Little Crane Cap Precision engineered and fabricated from stainless steel, this removable crane will lift heavy loads with ease. The fixed upper pulley prevents twisted lifting lines while the lower pulley has an integral snap hook for easy attachment to outboards, groceries, sail bags, dive gear, scooters, bicycles or any other type of load. Crane arm rotates 270 degrees. Best of all, it takes just 20 seconds to set up or remove for storage-no tools required! Comes complete for deck, rail, or bulkhead mounting. Includes polished stainless steel mast, polished stainless steel arm, upper and lower mounting brackets, rail adapters for 7/8" and 1" rails, pulley, snap hook, and 5/16" line.
|
|
|
Davis
HYDRAULIC PL-65 W/O GAUGE JACK
Product Available:
yes
Sku Number:
368080610
Manufacturer ID:
65002
UPC Number:
|
$
759.99 |
|
|
HYDRAULIC PL-65 W/O GAUGE JACK Improved performance for virtually all outboards!The unique outboard motor hydraulic lifting device works independently of your power trim and tilt to allow the boat-motor-prop combination to work at maximum efficiency. The power lift gives you the ability to adjust you motor down deeper in the water (for better hold shots) or up closer to the surface (for better top end). The Power-Lift sets the outboard back from the transom 5.5 inches, allowing the prop to run in cleaner water. Available with or without level indicator gauge.
|
|
|
Unified-Marine
Outboard Motor Ext
Product Available:
yes
Sku Number:
368220018
Manufacturer ID:
1440
UPC Number:
028761014401 |
$
37.99 |
|
|
Outboard Motor Ext This lightweight tiller extension is made for fit virtually all twist grip outboard motors up to 25hp. Made out of highest quality polycarbonates and comes complete with stainless steel hardware. Adjusts from 30" to 47".Model : 1440 Sh. Wt. 2 lbs.
|
|
|
CMC
Motor Support Bracket
Product Available:
yes
Sku Number:
367430089
Manufacturer ID:
50073731
UPC Number:
737765737314 |
$
34.99 |
|
|
Motor Support Bracket Protects transom, motor and steering components from road shock while trailer is in use. Our universal fit bracket comes with both roller and trailer mounting hardware. Easy to install and comes with a 10" motor strap and 5" trailer strap.
|
|
|
CMC
PT-35 TILT&TRIM (GAUGE NOT AVAIL)
Product Available:
yes
Sku Number:
368080651
Manufacturer ID:
52100
UPC Number:
|
$
479.99 |
|
|
PT-35 TILT&TRIM (GAUGE NOT AVAIL) Get power tilt and trim, better boat handling, more speed, and lower fuel consumption!The CMC tilt and trim will allow you change the angle of your motor to obtain the best performance under all conditions. It can give you a more stable ride, better fuel economy, better top end, and more prop clearance when navigating shallow waters. Two models available to fit different types of outboards.
|
|
|
Marubeni
PT-130 TILT&TRIM W/GAUGE
Product Available:
yes
Sku Number:
368080636
Manufacturer ID:
13001
UPC Number:
|
$
599.99 |
|
|
PT-130 TILT&TRIM W/GAUGE Get power tilt and trim, better boat handling, more speed, and lower fuel consumption!The CMC tilt and trim will allow you change the angle of your motor to obtain the best performance under all conditions. It can give you a more stable ride, better fuel economy, better top end, and more prop clearance when navigating shallow waters. Two models available to fit different types of outboards.
|
|
|
Garelick
Flushing Plug 5B Thru 18C2
Product Available:
yes
Sku Number:
369101225
Manufacturer ID:
336600070M
UPC Number:
792379500259 |
$
6.99 |
|
|
Flushing Plug 5B Thru 18C2 Tohatsu's Flushing plug allows you to connect a hose to your Tohatsu Outboard Motor and flush out the raw-water cooling system. The fitting threads into a flush port on the motor. Sh. Wt. 1 lb.
|
|
|
Garelick
STATIONARY OUTBOARD BRACKET
Product Available:
yes
Sku Number:
366480267
Manufacturer ID:
71074:01
UPC Number:
038203710747 |
$
85.99 |
|
|
STATIONARY OUTBOARD BRACKET Fixed height outboard bracket is perfect for auxiliary or trolling motor. 304 stainless bracket and hardware with black poly mounting board holds motors up to 15 H.P.
|
|
|
Garelick
Outboard Motor Carrier
Product Available:
yes
Sku Number:
366480465
Manufacturer ID:
31600:01
UPC Number:
038203316000 |
$
78.99 |
|
|
Outboard Motor Carrier Outboards motors were not designed to be carried by hand! They are awkward, bulky, and extremely heavy. Before you hurt yourself or your outboard, invest in a rolling motor carrier by Garelick. Made of sturdy corrosion resistant aluminum tubing, these carriers are great for storage and moving of outboard motors. Will hold any standard shaft outboard up to 30 hp or 130 lbs.
|
|
|
CMC
Motor Safety Cable
Product Available:
yes
Sku Number:
366480432
Manufacturer ID:
71030:01
UPC Number:
038203710303 |
$
29.99 |
|
|
Motor Safety Cable Your outboard is a big investment. Make sure you don't lose it with this vinyl covered safety cable from Garelick. 48'' long cable attaches motor to transom.
|
|
|
Minn-Kota
PT-130 TILT&TRIM W/O GAUGE
Product Available:
yes
Sku Number:
368080644
Manufacturer ID:
13002
UPC Number:
|
$
519.99 |
|
|
PT-130 TILT&TRIM W/O GAUGE Get power tilt and trim, better boat handling, more speed, and lower fuel consumption!The CMC tilt and trim will allow you change the angle of your motor to obtain the best performance under all conditions. It can give you a more stable ride, better fuel economy, better top end, and more prop clearance when navigating shallow waters. Two models available to fit different types of outboards.
|
|
|
Davis
Maxxum Pro Freshwater Bow Mount Trolling Motors, 80 Lbs. Thrust
Product Available:
yes
Sku Number:
369632773msk
Manufacturer ID:
UPC Number:
|
$
1059.99 |
|
|
Maxxum Pro Freshwater Bow Mount Trolling Motors, 80 Lbs. Thrust For tournament anglers and hard-core fishermen who spend dawn to dusk on the water, everything comes down to catching more fish. Braggin' rights. Bigger paydays. More trophies. The Maxxum Pro, with Minn Kota exclusive Lift-Assist stow and deploy, makes the job of lifting your trolling motor in and out of the water easier than ever before. That's why Minn Kota is the first choice of more serious anglers than any other trolling motor. Spend less effort on your trolling motor and more effort on putting weight in the livewell.Exclusive Lift-Assist - Cuts the weight of stowing and deploying your trolling motor by 50%. Heavy-duty gas-charged spring makes lifting your motor in and out of the water as easy as your SUV tailgate. Smooth, easy and extra quiet.Optional Universal Sonar - An integrated and protected transducer in the lower unit of the motor offers plug-in compatibility with your favorite brand of fish-finding equipment.Streamlined Foot Pedal - Puts you in complete control. Easy to use and ergonomically-designed for all-day comfort. Heel/toe action provides reliable, responsive steering.Bowguard 360? Breakaway Mount - A Minn Kota exclusive! Breaks away on impact from any direction, protecting your motor, shaft and boat. Get uninterrupted fishing as the motor automatically resets itself. No more leaning over the bow of your boat on your hands and knees wrestling with resetting your motor.Maximizer - Get up to five times longer run time on a single charge. Maximizer technology controls the draw of power at infinitely variable speeds to conserve battery power and extend run time.Overload Sensing Circuitry - Protects your motor from overheating when accidentally engaged in the stowed position.Rock-Solid Maxxum Mount - The strongest bow-mount system in the world. Go for broke without worrying about breaking down. Stowed, the Maxxum Mount won't budge, flex or vibrate.Indestructible Composite Shaft - Guaranteed for Life! - Pound for pound, our ultra high-yield composite material has been tested to be three times the strength of steel. Virtually indestructible, it flexes on impact and then returns to its original position. Unlike steel, will not kink, break, rust or corrode. Guaranteed for life!Cool, Quiet Power - Minn Kota's larger brushes, windings and commutators generate less heat, less noise and run cooler?extending motor life and conserving battery power. You get greater sustained thrust and more time on the water. A unique bearing system produces low rpms/high torque to cut down on fish-spooking noise - so quiet they'll never hear you coming.Weedless Wedge 2 - The latest generation of this legendary design features swept-back and flared blades to "wedge" weeds away. Pass through the thick stuff without battery-draining "chopping and hacking." A Minn Kota exclusive. Shaft Lengths - Available in 42", 52" and 62" shaft lengths (ideal for deep-V hulls?keeps lower unit in the water under
|
|
|
CMC
Doel-Fin Hydrofoil Stabilizer
Product Available:
yes
Sku Number:
368960019msk
Manufacturer ID:
UPC Number:
|
$
29.99 |
|
|
Doel-Fin Hydrofoil Stabilizer Looking for better fuel economy, faster hole shot, and improved handling? Install a set of these hydrofoils from Doel-Fin and you will get all three. Simple installation requires drilling four holes, and tightening four bolts. Available in black and white.
|
|
|
HYDRAULIC PL-65 W/GAUGE PWR-LIFTJACK
Product Available:
yes
Sku Number:
368080602
Manufacturer ID:
65001
UPC Number:
|
$
859.99 |
|
|
HYDRAULIC PL-65 W/GAUGE PWR-LIFTJACK Improved performance for virtually all outboards!The unique outboard motor hydraulic lifting device works independently of your power trim and tilt to allow the boat-motor-prop combination to work at maximum efficiency. The power lift gives you the ability to adjust you motor down deeper in the water (for better hold shots) or up closer to the surface (for better top end). The Power-Lift sets the outboard back from the transom 5.5 inches, allowing the prop to run in cleaner water. Available with or without level indicator gauge.
|
|
|
