|
Nauticus
"Trim Tab Kit 24"" x 9"" w/o Control"
Product Available:
YES
Sku Number:
MP63509513
Manufacturer ID:
249
UPC Number:
|
$
583.94 |
|
|
"Trim Tab Kit 24"" x 9"" w/o Control Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.Standard Trim Tab KitBennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. Kits are complete with all the necessary components for installation." 
|
|
|
Lenco-Marine
ST1290-60 Smart Tab Trim Tabs
Product Available:
YES
Sku Number:
MP63527242
Manufacturer ID:
ST1290-60
UPC Number:
698690129066 |
$
179.98 |
|
|
"ST1290-60 Smart Tab Trim Tabs ST1290-60ST1290-60 Smart Tabs Trim TabsSmart Tabs Series for boats 15 - 18 ft with 60 - 150 hp motors.Smart Tabs from Nauticus, Inc.IMPROVES YOUR BOAT'S OVERALL PERFORMANCE - GUARANTEED!!!If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self adjust and perform better for less money? Our breakthrough technology in trim tabs is completely automatic requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat. The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. Reduce the minimum planning speed by up to 33%Faster AccelerationIncrease top speedProvide a level, more comfortable ride at lower speeds Improve fuel economy, handling and safetyNO HYDRAULICS - NO ELECTRIC SWITCHESNauticus trim tabs are completely automatic requiring no operator adjustment while underway. The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. (see installation instruction).SPEED REGULATEDNauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag. BOAT STABILIZERSEven when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking. ONE OF A KINDThe unique system is the only one of its kind in the industry. The internal valve system is truly ""smart"" in its design of controlling you boats performance. It will reduce the minimum planning speed by 33% Provide a level, more comfortable ride at lower speedsImprove economy, handling and safetyAs the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator load rating (maximum LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat.The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. Nauticus trim tabs provide smooth and undetectable reaction to boat speed creating a level, more comfortable"
|
|
|
Lenco-Marine
"18"" x 14"" Heavy Duty Racing Tab Kit with Indicator Switch"
Product Available:
YES
Sku Number:
MP63524046
Manufacturer ID:
RT18X14HDI
UPC Number:
|
$
1336.94 |
|
|
"18"" x 14"" Heavy Duty Racing Tab Kit with Indicator Switch Racing TabsHeavy DutyExtreme-duty actuators with 316 stainless steel billet ram. 1" turned up edges with 2" taper on the inside. Full transom back plate and adjustable C channel mounting brackets with 5/16" stainless steel mounting studs. All 12-gauge 304 stainless steel construction with black powder coating.We make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's RT series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?All stainless steel construction (no dissimilar metals), sand blasting and powder coated for long lasting good looksActuator speed is precise and controllable so there are no surprises at top speedsModels have massive backplates and adjustable mounting channels with thru-bolted actuators for the ultimate in strength and reliabilityModels use solid stainless steel billet rams that are chemically polished for unsurpassed durabilityActuatorsInstant responseFully submersible, maintenance-free and sealed for lifeHigh-impact, 50% glass fiber-filled, ultrabiolet-resistant nylon case5/16" stainless steel boltsEach kit contains:2 actuators with stainless steel mounting bolts2 trim tab planesKits come pre-assembled"
|
|
|
API-Marine
12" x 12" Trim Tab Kit w/o Switch
Product Available:
YES
Sku Number:
MP63524073
Manufacturer ID:
15007-101
UPC Number:
874847000321 |
$
502.94 |
|
|
12" x 12" Trim Tab Kit w/o Switch TT12x12SwitchNo SwithBoat Length17'-30'Tab Length12"Tab Width12"Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down14-gauge laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware
|
|
|
Boat-Leveler-Co
Tilt Trim Motors Tilt/Trim Motor, 2 Wire Omc 1965-81
Product Available:
YES
Sku Number:
MP81125396
Manufacturer ID:
PT200NM
UPC Number:
161480 |
$
168.94 |
|
|
Tilt Trim Motors Tilt/Trim Motor, 2 Wire Omc 1965-81 API Marine API Tilt Trim Motors - TILT/TRIM MOTOR, 2 WIRE OMC 1965-81
|
|
|
Bennett-Trim-Tabs
Solenoid Valve Insta Trim # 12701-12 Green
Product Available:
YES
Sku Number:
MP63488422
Manufacturer ID:
12701-12
UPC Number:
000000162210 |
$
60.94 |
|
|
Solenoid Valve Insta Trim # 12701-12 Green BOAT LEVELER SOLENOID VALVE INSTA TRIM # 12701-12 GREEN
|
|
|
API
M80 Sport Tabe w/ Electronic Indicator Control
Product Available:
YES
Sku Number:
MP63517289
Manufacturer ID:
M80EIC
UPC Number:
|
$
788.94 |
|
|
M80 Sport Tabe w/ Electronic Indicator Control M80 Sport TabBennett's new M80 Sport Tabs are ideal for boats in the 17' - 23' range. Their unique Batwing design provides 30% more lift than conventional Trim Tabs. Space saving design insures easy installation on virtually any transom.Designed with ease of installation in mind the M80 Kits include an installation video.
|
|
|
Boat-Leveler-Co
Tilt Trim Motors Tilt/Trim, 3 Wire Motor Only
Product Available:
YES
Sku Number:
MP81125405
Manufacturer ID:
PT500NM
UPC Number:
161498 |
$
183.94 |
|
|
Tilt Trim Motors Tilt/Trim, 3 Wire Motor Only API Marine API Tilt Trim Motors - TILT/TRIM, 3 WIRE MOTOR ONLY
|
|
|
API
"18"" x 9"" Trim Tab Set"
Product Available:
YES
Sku Number:
MP63509278
Manufacturer ID:
N189000
UPC Number:
000000162142 |
$
514.94 |
|
|
"18"" x 9"" Trim Tab Set Features:WiringColor-coded wiring in 25' to 40' lengths with quick connects fittings, meets federal standards for heat, pull and insulation, making installation easy.SolenoidsThey are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type hose fittings provide tight, secure connections.MotorA powerhouse with coated wirings and a thermal overload that resists temperature and amperage build-up. 1 3/4" stack windings and top mounting eliminated oil leakage. The motor is mounted with stainless steel nuts and bolts, and is easily disassembled.BracketsSwivel type brackets allow cylinders to be mounted an adjusted to any angle. Knockout pins act as shear pins it tab strikes an object.PumpDesigned and engineered exclusively by Instatrim. The built-in bypass is factory set at 400 P.S.I. tolerance held to .00025. Amperage doesn't exceed 16 because the unit circulates oil, rather than stalling out or trying to pump additional pressure.Motor Cover4 1/2" D x 6" W x 11"H, high impact ABS plastic cover with a built-in oil reservoir mounts easily with two screws. The filler is located in front. Our cover protects the motor from occasional wash down. CylindersImpact resistant, fiberglass reinforced nylon cylinders eliminates expansion and resists ultra-violet rays. Two expanding type seals, plus O-ring, eliminates high and low pressure leaks. Barbed cylinder fitting and an inserted tubular rod prevents hose blow-off and breakage. A stainless steel spring retracts the cylinder when the boat is not in motion.Trim Tabs12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim's hinges prevent most spray and can be used for transom or bottom mounting.HoseDesigned and manufactured exclusively for Insta-Trim with nylon-reinforced webbing and protective PVC coating. Rated at 2000 lb. burst pressure, 15' of hose is supplied for your system. Entering the transom 6" above the water line, the hoses are held securely with hose trim.Stainless steel clamps hold the hose to barb fitting at the solenoid. Rocker Type ControlsMounted on the dash they are easy to operate. 2TP Micro switch with silver contact points adjust the tabs for maximum control and performance.One pint of Insta-Trim biodegradable transmission oil, funnel and mounting hardware is supplied."
|
|
|
T-H
Tilt Trim Motors Tilt/Trim Motor, 2 Wire, Motor Only
Product Available:
YES
Sku Number:
MP81125399
Manufacturer ID:
PT301NM
UPC Number:
161483 |
$
135.94 |
|
|
Tilt Trim Motors Tilt/Trim Motor, 2 Wire, Motor Only API Marine API Tilt Trim Motors - TILT/TRIM MOTOR, 2 WIRE, MOTOR ONLY
|
|
|
Bennett-Trim-Tabs
Pt 130 Tilt & Trim W/guage
Product Available:
YES
Sku Number:
EP104688800
Manufacturer ID:
13001
UPC Number:
121891 |
$
983.94 |
|
|
"Pt 130 Tilt & Trim W/guage PT 130 Tilt N' Trim with gauge The Electric Hydraulic System is totally waterproof and is rated over 7800 lbs. of thrust! This system is made of 100% non ferrous material which makes it more impervious to salt water and fresh water. 1 year Hydraulic system warranty.F E A T U R E S Specs: 10 hp 130 hp 20° trim, 90° tilt 6"" Set 12v E"
|
|
|
Boat-Leveler
Trim Tabs Lexan Cover
Product Available:
YES
Sku Number:
MP63528772
Manufacturer ID:
VP1138
UPC Number:
|
$
16.94 |
|
|
Trim Tabs Lexan Cover BENNETT TRIM TABS LEXAN COVER
|
|
|
Bennett
Universal Motor Pump 12V Universal Motor Pump Unit
Product Available:
YES
Sku Number:
MP81125368
Manufacturer ID:
12700-UNIV
UPC Number:
146441 |
$
350.94 |
|
|
Universal Motor Pump 12V Universal Motor Pump Unit Boat Leveler Universal Motor Pump - 12V UNIVERSAL MOTOR PUMP UNIT
|
|
|
Bennett-Trim-Tabs
"Complete Drop Fin System Set Of Trim Tabs, 18""X12"", Drop Fin"
Product Available:
YES
Sku Number:
MP81125430
Manufacturer ID:
V351-18X12DFE
UPC Number:
20323 |
$
669.94 |
|
|
"Complete Drop Fin System Set Of Trim Tabs, 18""X12"", Drop Fin Bennett Complete Drop Fin System - SET OF TRIM TABS, 18""X12"", DROP FIN"
|
|
|
Lenco-Marine
"Trim Tab Kit 48"" x 9"" w/o Control"
Product Available:
YES
Sku Number:
MP63503222
Manufacturer ID:
489
UPC Number:
|
$
715.94 |
|
|
"Trim Tab Kit 48"" x 9"" w/o Control Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.Standard Trim Tab KitBennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. Kits are complete with all the necessary components for installation."
|
|
|
Lenco-Marine
"9"" x 40"" Standard Trim Tab Kit with Indicator Switch"
Product Available:
YES
Sku Number:
MP63506169
Manufacturer ID:
TT9X40I
UPC Number:
|
$
982.94 |
|
|
"9"" x 40"" Standard Trim Tab Kit with Indicator Switch Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down12-gauge (2.6 mm) laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware"
|
|
|
Boat-Leveler
Key Pad For Tactile Trim Tab Controller
Product Available:
YES
Sku Number:
MP63520655
Manufacturer ID:
30006-001
UPC Number:
874847001465 |
$
33.94 |
|
|
Key Pad For Tactile Trim Tab Controller LENCO KEY PAD FOR TACTILE TRIM TAB CONTROLLER
|
|
|
Lenco-Marine
Hose Hose Trim With Screws
Product Available:
YES
Sku Number:
MP81125340
Manufacturer ID:
12729
UPC Number:
03430 |
$
14.94 |
|
|
Hose Hose Trim With Screws Boat Leveler Hose - HOSE TRIM WITH SCREWS
|
|
|
Boat-Leveler-Co
"4"" x 12"" Limited Space Trim Tab Kit w/o Switch"
Product Available:
YES
Sku Number:
MP63500472
Manufacturer ID:
15052-101
UPC Number:
874847004749 |
$
465.94 |
|
|
"4"" x 12"" Limited Space Trim Tab Kit w/o Switch LS ""Limited Space Trim Tab Kit4""L x 12""W 14GA Stainless Steel Trim TabsDesigned to fit on transoms with limited space due to boarding ladders and swim platforms"
|
|
|
Bennett
Hydraulic Cylinde Insta Trim # 12727-A
Product Available:
YES
Sku Number:
MP63509285
Manufacturer ID:
12727
UPC Number:
|
$
107.94 |
|
|
Hydraulic Cylinde Insta Trim # 12727-A BOAT LEVELER HYDRAULIC CYLINDE INSTA TRIM # 12727-A
|
|
|
Lenco-Marine
Wire HarneSS Wire HarneSS Only, 22' Standard
Product Available:
YES
Sku Number:
MP80820577
Manufacturer ID:
WH1000
UPC Number:
666285319109 |
$
34.94 |
|
|
Wire HarneSS Wire HarneSS Only, 22' Standard Bennett Wire Harness - WIRE HARNESS ONLY, 22' STANDARD
|
|
|
Lenco-Marine
"12"" x 30"" Super Strong Trim Tab Kit with Tactile Switch"
Product Available:
YES
Sku Number:
MP63524088
Manufacturer ID:
TT12X30SS
UPC Number:
|
$
1253.94 |
|
|
"12"" x 30"" Super Strong Trim Tab Kit with Tactile Switch Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down12-gauge (2.6 mm) laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware"
|
|
|
Lenco-Marine
"19"" x 14"" Extreme Duty Racing Tab Kit without Switch"
Product Available:
YES
Sku Number:
MP63524050
Manufacturer ID:
15046-101
UPC Number:
874847004688 |
$
1801.94 |
|
|
"19"" x 14"" Extreme Duty Racing Tab Kit without Switch Racing TabsExtremeExtreme-duty actuators with 316 stainless steel billet ram. 1" turned up edges with 2" taper on the inside. Full transom back plate and adjustable C channel mounting brackets with 3/8" stainless steel mounting studs. All 10-gauge 304 stainless steel construction with black powder coating.We make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's RT series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?All stainless steel construction (no dissimilar metals), sand blasting and powder coated for long lasting good looksActuator speed is precise and controllable so there are no surprises at top speedsModels have massive backplates and adjustable mounting channels with thru-bolted actuators for the ultimate in strength and reliabilityModels use solid stainless steel billet rams that are chemically polished for unsurpassed durabilityStitch welded heavy duty stainless steel hinge & bracketAdjustable mounting holes10-gauge laser cut stainless steel trim tab planes and hingesActuatorsInstant responseFully submersible, maintenance-free and sealed for lifeElectro-poished solid 316 stainless steel billet endsHigh-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case3/8" stainless steel boltsEach kit contains:4 actuators with stainless steel mounting bolts2 trim tab planesKits come pre-assembled"
|
|
|
Boat-Leveler-Co
"9"" x 24"" Standard Trim Tab Kit with Indicator Switch"
Product Available:
YES
Sku Number:
MP63512245
Manufacturer ID:
TT9X24I
UPC Number:
|
$
880.94 |
|
|
"9"" x 24"" Standard Trim Tab Kit with Indicator Switch Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down12-gauge (2.6 mm) laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware"
|
|
|
Lenco-Marine
Oil & Funnel Kit Insta Trim # 12612
Product Available:
YES
Sku Number:
MP63495873
Manufacturer ID:
12612
UPC Number:
000000162227 |
$
20.94 |
|
|
Oil & Funnel Kit Insta Trim # 12612 BOAT LEVELER OIL & FUNNEL KIT INSTA TRIM # 12612
|
|
|
Lenco-Marine
Indicator Switch for Dual Actuator Tabs
Product Available:
YES
Sku Number:
MP63816759
Manufacturer ID:
15071-001
UPC Number:
874847001403 |
$
458.94 |
|
|
Indicator Switch for Dual Actuator Tabs Tactile SwitchesStandard Tactile Switch for all trim tabs and Troll'n TabsFeatures:Self-contained, sealed keypadSelf-contained, sealed control box moduleFade/smudge-proof, laser engraved graphicsPlug & play switch wiring harness connectorBuilt-in retract feature returns tabs to a fully retracted position when power is removed2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all timesPhoto eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight24-volt compatibilityThe Lenco indicator switch is the most advanced trim tab switch available. The switch itself is completely waterproof, and has an over-molded connector to eliminate water intrusion. L.E.D. indicator lights let you know exactly where our trim tabs are at all times.A photochromic eye automatically adjusts the level of light intensity, allowing better visibility of the entire switch in direct sunlight. The indicator switch also come with out retract feature. (Just a little extra piece of mind.)The standard tactile switch is built to all the same exacting standards as the indicator. Our tactile switch has long been a vital part of what makes Lenco's trim tabs the best. We may call it a "Standard switch", but it's much more than that to us.
|
|
|
Bennett-Trim-Tabs
Standard Switches Brain Box F/Tactile Contrler 124-Bn
Product Available:
YES
Sku Number:
MP81125418
Manufacturer ID:
30134-001
UPC Number:
167155 |
$
116.94 |
|
|
Standard Switches Brain Box F/Tactile Contrler 124-Bn Lenco Marine Inc Standard Switches - BRAIN BOX F/TACTILE CONTRLER 124-BN
|
|
|
Bennett-Trim-Tabs
"Trim Tab Kit 18"" x 9"" w/o Control"
Product Available:
YES
Sku Number:
MP63509512
Manufacturer ID:
189
UPC Number:
|
$
560.94 |
|
|
"Trim Tab Kit 18"" x 9"" w/o Control Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.Standard Trim Tab KitBennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. Kits are complete with all the necessary components for installation."
|
|
|
Bennett
AR512 Auto Tab Retractor - 12v
Product Available:
YES
Sku Number:
MP63509543
Manufacturer ID:
AR512
UPC Number:
|
$
60.94 |
|
|
"AR512 Auto Tab Retractor - 12v Auto Tab RetractorAutomatically retracts tabs when boat?s ignition is turned off. Trailered or dry storage boats have added defense from trim tab damage with them ""full-up"" during hauling, trailering and storage. Ensures trim tabs are all the way up every time boat is started if boat is not equipped with trim tab indicators. Easily installed under the instrument panel, the ATR connects to the trim tab control and engine ignition switch."
|
|
|
Lenco-Marine
Tab Position Indicator Tpi Trim Kit Single Station 35' Cbl
Product Available:
YES
Sku Number:
MP81125436
Manufacturer ID:
TPI2000-35
UPC Number:
204103 |
$
268.94 |
|
|
Tab Position Indicator Tpi Trim Kit Single Station 35' Cbl Bennett Tab Position Indicator - TPI TRIM KIT SINGLE STATION 35' CBL
|
|
|
Bennett-Trim-Tabs
"18"" x 14"" Racing Tab Kit with Indicator Switch"
Product Available:
YES
Sku Number:
MP63524047
Manufacturer ID:
RT18X14I
UPC Number:
|
$
1089.94 |
|
|
"18"" x 14"" Racing Tab Kit with Indicator Switch Racing TabsStandard DutyStandard actuator with 5/16" stainless steel through bolts. 1" turned up edges with 2" taper on the inside. All 12-gauge 304 stainless steel construction with black powder coating.We make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's RT series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?All stainless steel construction (no dissimilar metals), sand blasting and powder coated for long lasting good looksActuator speed is precise and controllable so there are no surprises at top speedsActuatorsInstant responseFully submersible, maintenance-free and sealed for lifeHigh-impact, 50% glass fiber-filled, ultraviolet-resistant nylon caseEach kit contains:2 actuators with stainless steel mounting bolts2 trim tab planesstainless steel mounting screws"
|
|
|
Bennett
"Marine 8"" x 10"" Tournament Trim Tab Kit"
Product Available:
YES
Sku Number:
MP63509532
Manufacturer ID:
BT810
UPC Number:
|
$
622.94 |
|
|
"Marine 8"" x 10"" Tournament Trim Tab Kit Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.Tournament TabsHigh bow on take-off, pounding, porpoising, and excessive use of the engine's power trim are factors reducing the efficiency of high performance fishing boats. You may also find yourself needing a high throttle setting just to stay on plane. With a unique batwing design and a high tech black powder coated finish, Tournament Tabs are engineered to fit your small boat. They increase stability, versatility, and overall performance, helping your boat run on plane in shallow water even at slower speeds. Tournament Tabs are hydraulically adjustable, putting total attitude control at your fingertips."
|
|
|
Lenco-Marine
Interrupter Relay Interrupter Relay
Product Available:
YES
Sku Number:
MP80820552
Manufacturer ID:
IR1000
UPC Number:
666285316801 |
$
30.94 |
|
|
Interrupter Relay Interrupter Relay Bennett Interrupter Relay - INTERRUPTER RELAY
|
|
|
Boat-Leveler
Tactile Switch With L.E.D. Flybridge Indicator Led 50' 123Fb52
Product Available:
YES
Sku Number:
MP81125416
Manufacturer ID:
30041-005
UPC Number:
166293 |
$
235.94 |
|
|
Tactile Switch With L.E.D. Flybridge Indicator Led 50' 123Fb52 Racor 75B32009 Dual Spin-On Series - 2 MIC. REPLACEMENT ELEMENT F/B32011
|
|
|
Lenco-Marine
Waterproof Trim Tab Switches Waterproof Tab Switch Black Face
Product Available:
YES
Sku Number:
MP81125367
Manufacturer ID:
2002
UPC Number:
137648 |
$
138.94 |
|
|
Waterproof Trim Tab Switches Waterproof Tab Switch Black Face Boat Leveler Waterproof Trim Tab Switches - WATERPROOF TAB SWITCH BLACK FACE
|
|
|
Lenco-Marine
Trim Tab Actuators Lower Mounting Bracket
Product Available:
YES
Sku Number:
MP81125370
Manufacturer ID:
50014-001
UPC Number:
155081 |
$
11.94 |
|
|
Trim Tab Actuators Lower Mounting Bracket Racor Racor 220R 225R Diesel Filter - Replacement Parts - DRAIN KNOB FOR 220/227
|
|
|
Lenco-Marine
"Standard Trim Tab Kits Trim Tab Kit 12X12"" W/O Switch"
Product Available:
YES
Sku Number:
MP81125384
Manufacturer ID:
15007-101
UPC Number:
155103 |
$
544.94 |
|
|
"Standard Trim Tab Kits Trim Tab Kit 12X12"" W/O Switch Lenco Marine Inc Standard Trim Tab Kits - TRIM TAB KIT 12X12"" W/O SWITCH"
|
|
|
Bennett-Trim-Tabs
"12"" x 12"" Heavy Duty Racing Tab Kit with Tactile Switch"
Product Available:
YES
Sku Number:
MP63524034
Manufacturer ID:
RT12X12HD
UPC Number:
|
$
974.94 |
|
|
"12"" x 12"" Heavy Duty Racing Tab Kit with Tactile Switch Racing TabsHeavy DutyExtreme-duty actuators with 316 stainless steel billet ram. 1" turned up edges with 2" taper on the inside. Full transom back plate and adjustable C channel mounting brackets with 5/16" stainless steel mounting studs. All 12-gauge 304 stainless steel construction with black powder coating.We make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's RT series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?All stainless steel construction (no dissimilar metals), sand blasting and powder coated for long lasting good looksActuator speed is precise and controllable so there are no surprises at top speedsModels have massive backplates and adjustable mounting channels with thru-bolted actuators for the ultimate in strength and reliabilityModels use solid stainless steel billet rams that are chemically polished for unsurpassed durabilityActuatorsInstant responseFully submersible, maintenance-free and sealed for lifeHigh-impact, 50% glass fiber-filled, ultrabiolet-resistant nylon case5/16" stainless steel boltsEach kit contains:2 actuators with stainless steel mounting bolts2 trim tab planesKits come pre-assembled"
|
|
|
Lenco-Marine
"Trim Tab Kit 12"" x 12"" w/o Control"
Product Available:
YES
Sku Number:
MP63509518
Manufacturer ID:
1212
UPC Number:
|
$
561.94 |
|
|
"Trim Tab Kit 12"" x 12"" w/o Control Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.Standard Trim Tab KitBennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. Kits are complete with all the necessary components for installation."
|
|
|
Lenco-Marine
"16"" x 12"" Heavy Duty Racing Tab Kit without Switch"
Product Available:
YES
Sku Number:
MP63524041
Manufacturer ID:
15043-101
UPC Number:
874847004640 |
$
928.94 |
|
|
"16"" x 12"" Heavy Duty Racing Tab Kit without Switch Racing TabsHeavy DutyExtreme-duty actuators with 316 stainless steel billet ram. 1" turned up edges with 2" taper on the inside. Full transom back plate and adjustable C channel mounting brackets with 5/16" stainless steel mounting studs. All 12-gauge 304 stainless steel construction with black powder coating.We make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's RT series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?All stainless steel construction (no dissimilar metals), sand blasting and powder coated for long lasting good looksActuator speed is precise and controllable so there are no surprises at top speedsModels have massive backplates and adjustable mounting channels with thru-bolted actuators for the ultimate in strength and reliabilityModels use solid stainless steel billet rams that are chemically polished for unsurpassed durabilityActuatorsInstant responseFully submersible, maintenance-free and sealed for lifeHigh-impact, 50% glass fiber-filled, ultrabiolet-resistant nylon case5/16" stainless steel boltsEach kit contains:2 actuators with stainless steel mounting bolts2 trim tab planesKits come pre-assembled"
|
|
|
Bennett-Trim-Tabs
"Extreme Duty Actuator - 12v - 2 1/4"" Stroke - 5/16"" Hardware"
Product Available:
YES
Sku Number:
MP63526502
Manufacturer ID:
15055-001
UPC Number:
874847001236 |
$
231.94 |
|
|
"Extreme Duty Actuator - 12v - 2 1/4"" Stroke - 5/16"" Hardware 101 XD Extreme Duty ActuatorPart # (Superseded #)#15055-001 (101 XD-5) 12 Volt w/6' (1.83 m) leads with Deutsch connectors5/16"" (.79 cm) mounting hardware, solid stainless steel billet endIncluded in Heavy Duty PerformanceTab KitsStroke: 2-1/4"" (5.72 cm)Length overall: 11-3/8"" (28.89 cm)Length pin to pin: 10-3/4"" (27.31)Diameter (upper housing): 2-1/2"" (6.35 cm)Top cap gland seal sheaths the actuator cable outer jacket as well as both internal conductors for maximum waterproofingCorrosion proof Vandar mounts Stainless steel ram won't flex, even under extreme loadsDouble O-ring for maximum protectionBallscrew rotates freely on 12 ball bearings at both ends of its stroke so there's no need for complicated limit switches and clutchesSelf-locking ballscrew locks into position and will not driftPrecision molded, powdered metal, high alloy gears provide high accuracy, high wear resistance, and high strength for long lifeTough, high-torque motor easily transfers 750 lbsHigh-impact, ultraviolet resistant nylon 66, 50% glass fiber reinforced thermoplastic housingCorrosion proof Vandar cap and mount, stands up to severe loads"
|
|
|
API
M80 Sport Tab System w/ Tab Position Indicator Control
Product Available:
YES
Sku Number:
MP63524393
Manufacturer ID:
M80TPI
UPC Number:
|
$
765.94 |
|
|
M80 Sport Tab System w/ Tab Position Indicator Control M80 Sport Tab SystemBennett's new M80 Sport Tabs are ideal for boats in the 17' - 23' range. Their unique Batwing design provides 30% more lift than conventional Trim Tabs. Space saving design insures easy installation on virtually any transom.Designed with ease of installation in mind the M80 Kits include and installation video.
|
|
|
Lenco-Marine-Inc
Tilt Trim Motors Tilt/Trim Motor, 2 Wire, Motor Only
Product Available:
YES
Sku Number:
MP81125400
Manufacturer ID:
PT303NM
UPC Number:
161484 |
$
183.94 |
|
|
Tilt Trim Motors Tilt/Trim Motor, 2 Wire, Motor Only API Marine API Tilt Trim Motors - TILT/TRIM MOTOR, 2 WIRE, MOTOR ONLY
|
|
|
Panther
Tactile Switch With L.E.D. Flybridge Indicator Led 30' 123Fb32
Product Available:
YES
Sku Number:
MP81125393
Manufacturer ID:
30041-003
UPC Number:
158798 |
$
207.94 |
|
|
Tactile Switch With L.E.D. Flybridge Indicator Led 30' 123Fb32 Lenco Marine Inc Tactile Switch with L.E.D. - FLYBRIDGE INDICATOR LED 30' 123FB32
|
|
|
Lenco-Marine-Inc
Trim Switch Push Button Panther
Product Available:
YES
Sku Number:
EP104686301
Manufacturer ID:
55-1200
UPC Number:
836125001208 |
$
53.94 |
|
|
Trim Switch Push Button Panther Push Button Trim Switch Push Button switch and 12 ft cable will splice into any existing application for remote use or simply plug into an existing Panther product.
|
|
|
Bennett
"Trim Tab Actuators Actuator 2 1/4"" Strk W/6' Deutsch"
Product Available:
YES
Sku Number:
MP81125425
Manufacturer ID:
15054-001
UPC Number:
197827 |
$
189.94 |
|
|
"Trim Tab Actuators Actuator 2 1/4"" Strk W/6' Deutsch Lenco Marine Inc Trim Tab Actuators - ACTUATOR 2 1/4"" STRK W/6' DEUTSCH"
|
|
|
Bennett-Trim-Tabs
StainleSS Steel M80 M120 Sport Tabs Sport Tab Set 10X12 W/Rocker
Product Available:
YES
Sku Number:
MP80820566
Manufacturer ID:
M-120
UPC Number:
666285146606 |
$
667.94 |
|
|
StainleSS Steel M80 M120 Sport Tabs Sport Tab Set 10X12 W/Rocker Bennett Stainless Steel M80 M120 Sport Tabs - SPORT TAB SET 10X12 W/ROCKER
|
|
|
Lenco-Marine
"Trim Tab Kit 48"" x 12"" w/o Control"
Product Available:
YES
Sku Number:
MP63509523
Manufacturer ID:
4812
UPC Number:
|
$
868.94 |
|
|
"Trim Tab Kit 48"" x 12"" w/o Control Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.Standard Trim Tab KitBennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. Kits are complete with all the necessary components for installation."
|
|
|
Bennett-Trim-Tabs
"Standard Trim Tab Kits Trim Tab Kit 12X24"" W/O Switch"
Product Available:
YES
Sku Number:
MP81125386
Manufacturer ID:
15009-101
UPC Number:
155106 |
$
645.94 |
|
|
"Standard Trim Tab Kits Trim Tab Kit 12X24"" W/O Switch Lenco Marine Inc Standard Trim Tab Kits - TRIM TAB KIT 12X24"" W/O SWITCH"
|
|
|
Lenco-Marine
"Trim Tab Kit 54"" x 12"" w/ Euro Rocker Switch"
Product Available:
YES
Sku Number:
MP63509506
Manufacturer ID:
5412E
UPC Number:
|
$
1006.94 |
|
|
"Trim Tab Kit 54"" x 12"" w/ Euro Rocker Switch Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.Standard Trim Tab KitBennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. The Euro-Style Rocker Switch is included with these trim tab sets. Kits are complete with all the necessary components for installation."
|
|
|
Lenco-Marine
"16"" x 12"" Heavy Duty Racing Tab Kit with Indicator Switch"
Product Available:
YES
Sku Number:
MP63524040
Manufacturer ID:
RT16X12HDI
UPC Number:
|
$
1248.94 |
|
|
"16"" x 12"" Heavy Duty Racing Tab Kit with Indicator Switch Racing TabsHeavy DutyExtreme-duty actuators with 316 stainless steel billet ram. 1" turned up edges with 2" taper on the inside. Full transom back plate and adjustable C channel mounting brackets with 5/16" stainless steel mounting studs. All 12-gauge 304 stainless steel construction with black powder coating.We make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's RT series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?All stainless steel construction (no dissimilar metals), sand blasting and powder coated for long lasting good looksActuator speed is precise and controllable so there are no surprises at top speedsModels have massive backplates and adjustable mounting channels with thru-bolted actuators for the ultimate in strength and reliabilityModels use solid stainless steel billet rams that are chemically polished for unsurpassed durabilityActuatorsInstant responseFully submersible, maintenance-free and sealed for lifeHigh-impact, 50% glass fiber-filled, ultrabiolet-resistant nylon case5/16" stainless steel boltsEach kit contains:2 actuators with stainless steel mounting bolts2 trim tab planesKits come pre-assembled"
|
|
|
Bennett-Trim-Tabs
"17"" x 12"" Extreme Duty Racing Tab Kit with Indicator Switch"
Product Available:
YES
Sku Number:
MP63524044
Manufacturer ID:
RT17X12XDI
UPC Number:
|
$
1532.94 |
|
|
"17"" x 12"" Extreme Duty Racing Tab Kit with Indicator Switch Racing TabsExtremeExtreme-duty actuators with 316 stainless steel billet ram. 1" turned up edges with 2" taper on the inside. Full transom back plate and adjustable C channel mounting brackets with 3/8" stainless steel mounting studs. All 10-gauge 304 stainless steel construction with black powder coating.We make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's RT series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?All stainless steel construction (no dissimilar metals), sand blasting and powder coated for long lasting good looksActuator speed is precise and controllable so there are no surprises at top speedsModels have massive backplates and adjustable mounting channels with thru-bolted actuators for the ultimate in strength and reliabilityModels use solid stainless steel billet rams that are chemically polished for unsurpassed durabilityStitch welded heavy duty stainless steel hinge & bracketAdjustable mounting holes10-gauge laser cut stainless steel trim tab planes and hingesActuatorsInstant responseFully submersible, maintenance-free and sealed for lifeElectro-poished solid 316 stainless steel billet endsHigh-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case3/8" stainless steel boltsEach kit contains:4 actuators with stainless steel mounting bolts2 trim tab planesKits come pre-assembled"
|
|
|
Lenco-Marine
"Trim Tab Kit 12"" x 9"" w/o Control"
Product Available:
YES
Sku Number:
MP63509511
Manufacturer ID:
129
UPC Number:
|
$
515.94 |
|
|
"Trim Tab Kit 12"" x 9"" w/o Control Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.Standard Trim Tab KitBennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. Kits are complete with all the necessary components for installation."
|
|
|
Lenco-Marine
"16"" x 12"" Racing Tab Kit with Indicator Switch"
Product Available:
YES
Sku Number:
MP63524042
Manufacturer ID:
RT16X12I
UPC Number:
|
$
999.94 |
|
|
"16"" x 12"" Racing Tab Kit with Indicator Switch Racing TabsStandard DutyStandard actuator with 5/16" stainless steel through bolts. 1" turned up edges with 2" taper on the inside. All 12-gauge 304 stainless steel construction with black powder coating.We make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's RT series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?All stainless steel construction (no dissimilar metals), sand blasting and powder coated for long lasting good looksActuator speed is precise and controllable so there are no surprises at top speedsActuatorsInstant responseFully submersible, maintenance-free and sealed for lifeHigh-impact, 50% glass fiber-filled, ultrabiolet-resistant nylon caseEach kit contains:2 actuators with stainless steel mounting bolts2 trim tab planesstainless steel mounting screws"
|
|
|
Lenco-Marine
Standard Lower Mounting Bracket (3 Bolt)
Product Available:
YES
Sku Number:
MP63520647
Manufacturer ID:
50014-001
UPC Number:
874847001328 |
$
11.94 |
|
|
Standard Lower Mounting Bracket (3 Bolt) LENCO STANDARD LOWER MOUNTING BRACKET (3 BOLT)
|
|
|
Lenco-Marine
"9"" x 9"" Standard Trim Tab Kit without Switch"
Product Available:
YES
Sku Number:
MP63524058
Manufacturer ID:
15000-101
UPC Number:
874847000031 |
$
465.94 |
|
|
"9"" x 9"" Standard Trim Tab Kit without Switch Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down14-gauge laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware"
|
|
|
Bennett-Trim-Tabs
"9"" x 36"" Standard Trim Tab Kit with Tactile Switch"
Product Available:
YES
Sku Number:
MP63520709
Manufacturer ID:
TT9X36
UPC Number:
|
$
770.94 |
|
|
"9"" x 36"" Standard Trim Tab Kit with Tactile Switch Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down12-gauge (2.6 mm) laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware"
|
|
|
Lenco-Marine
Dual Station TPI Kit TPI2000B
Product Available:
YES
Sku Number:
MP63503235
Manufacturer ID:
TPI2000B
UPC Number:
|
$
401.94 |
|
|
Dual Station TPI Kit TPI2000B BENNETT DUAL STATION TPI KIT TPI2000B
|
|
|
Lenco-Marine
9" x 9" Edgemount Trim Tab Kit with Indicator Switch
Product Available:
YES
Sku Number:
MP63524055
Manufacturer ID:
TT9X9EI
UPC Number:
|
$
784.94 |
|
|
9" x 9" Edgemount Trim Tab Kit with Indicator Switch Edge MountMounts the actuator at the trailing edge of the plane, requiring 4" less transom height than standard mountTrim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down14-gauge laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware
|
|
|
Lenco-Marine
"Standard Trim Tab Kits Trim Tab Kit 9X9"" W/O Switch"
Product Available:
YES
Sku Number:
MP81125375
Manufacturer ID:
15000-101
UPC Number:
155092 |
$
503.94 |
|
|
"Standard Trim Tab Kits Trim Tab Kit 9X9"" W/O Switch Lenco Marine Inc Standard Trim Tab Kits - TRIM TAB KIT 9X9"" W/O SWITCH"
|
|
|
Bennett-Trim-Tabs
"9"" x 18"" Standard Trim Tab Kit with Indicator Switch"
Product Available:
YES
Sku Number:
MP63524061
Manufacturer ID:
TT9X18I
UPC Number:
|
$
819.94 |
|
|
"9"" x 18"" Standard Trim Tab Kit with Indicator Switch Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down14-gauge laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware"
|
|
|
Bennett-Trim-Tabs
ES2000A Euro Style Rocker Switch w/ 20' Wire Harness
Product Available:
YES
Sku Number:
MP63509535
Manufacturer ID:
ES2000A
UPC Number:
|
$
92.94 |
|
|
"ES2000A Euro Style Rocker Switch w/ 20' Wire Harness Euro-Style Rocker Switch ControlThis control is ergonomically designed, water resistant and provides a positive ""click"" when the trim tabs are engaged. Its lockout feature prevents user from pressing down on opposite directions at the same time. The control is easy to install, fitting into any existing Bennett 2 1/2-inch Rocker Switch hole. Bridge control comes with a 20' wire harness"
|
|
|
API
M120 Sport Tab System
Product Available:
YES
Sku Number:
MP63509528
Manufacturer ID:
M120
UPC Number:
|
$
617.94 |
|
|
M120 Sport Tab System Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.Sport TabsBennett's new M80 Sport Tabs are ideal for boats in the 17' - 23' range. Their unique Batwing design provides 30% more lift than conventional Trim Tabs. Space saving design insures easy installation on virtually any transom. Designed with ease of installation in mind the M80 Kit includes an installation video.
|
|
|
Lenco-Marine
Tilt Trim Motors Tilt/Trim, Motor & Pump
Product Available:
YES
Sku Number:
MP81125404
Manufacturer ID:
PT500N
UPC Number:
161497 |
$
460.94 |
|
|
Tilt Trim Motors Tilt/Trim, Motor & Pump API Marine API Tilt Trim Motors - TILT/TRIM, MOTOR & PUMP
|
|
|
Bennett
"24""-36"" Hatch Lift w/o Switch"
Product Available:
YES
Sku Number:
MP63524025
Manufacturer ID:
20768-001
UPC Number:
|
$
342.94 |
|
|
"24""-36"" Hatch Lift w/o Switch Hatch Lifts**Has the same stroke but 4"" Shorter in length**We make the best boats better!™Lenco hatch lifts are designed to meet the specific needs of the marine industry. They are made entirely of non-corrosive materials and are completely submersible, ensuring that they will look and perform like new for many years of trouble free boating. Our inline motor design makes mounting easier and delivers over 750lbs. of lift. Lenco's clutchless ballscrew design always runs in sync on dual lift applications and never binds. Hatchlifts are operated by our optional single rocker switch #125.Ballscrew spins freely when hatch is fully opened or closed eliminating limit switches and burned out motors.Stainless steel pull pin is standard with optional stainless steel non-locking slide bracket availableStainless steel ram locks in any positionHigh-impact, 50% glass fiber-filled, ultraviolet-resistant nylon caseFast and powerful motor only draws 5 ampsLenco hatch lifts install with a single power cable saving hours on installation compared to hydraulics"
|
|
|
Boat-Leveler
"Drop Fin Trim Plane Assemblies 12""X 12"" Drop Fin Trim Plane Assy."
Product Available:
YES
Sku Number:
MP80820582
Manufacturer ID:
TPA12X12DF
UPC Number:
666285302002 |
$
148.94 |
|
|
"Drop Fin Trim Plane Assemblies 12""X 12"" Drop Fin Trim Plane Assy. Bennett Drop Fin Trim Plane Assemblies - 12""X 12"" DROP FIN TRIM PLANE ASSY."
|
|
|
Lenco-Marine
Brackets Nylon Cylinder Bracket
Product Available:
YES
Sku Number:
MP81125444
Manufacturer ID:
12732A
UPC Number:
51518 |
$
17.94 |
|
|
Brackets Nylon Cylinder Bracket Boat Leveler Brackets - NYLON CYLINDER BRACKET
|
|
|
Lenco-Marine
"9"" x 18"" Standard Trim Tab Kit without Switch"
Product Available:
YES
Sku Number:
MP63524062
Manufacturer ID:
15002-101
UPC Number:
874847000147 |
$
499.94 |
|
|
"9"" x 18"" Standard Trim Tab Kit without Switch Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down14-gauge laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware"
|
|
|
Lenco-Marine
"37""-61"" Hatch Lift w/o Switch"
Product Available:
YES
Sku Number:
MP63524029
Manufacturer ID:
20728-001
UPC Number:
|
$
444.94 |
|
|
"37""-61"" Hatch Lift w/o Switch Hatch Lifts**Has same stroke but 4"" shorter in length**We make the best boats better!™Lenco hatch lifts are designed to meet the specific needs of the marine industry. They are made entirely of non-corrosive materials and are completely submersible, ensuring that they will look and perform like new for many years of trouble free boating. Our inline motor design makes mounting easier and delivers over 750lbs. of lift. Lenco's clutchless ballscrew design always runs in sync on dual lift applications and never binds. Hatchlifts are operated by our optional single rocker switch #125.Ballscrew spins freely when hatch is fully opened or closed eliminating limit switches and burned out motors.Stainless steel pull pin is standard with optional stainless steel non-locking slide bracket availableStainless steel ram locks in any positionHigh-impact, 50% glass fiber-filled, ultraviolet-resistant nylon caseFast and powerful motor only draws 5 ampsLenco hatch lifts install with a single power cable saving hours on installation compared to hydraulics"
|
|
|
Lenco-Marine
"12"" x 24"" Standard Trim Tab Kit without Switch"
Product Available:
YES
Sku Number:
MP63524083
Manufacturer ID:
15009-101
UPC Number:
874847000444 |
$
595.94 |
|
|
"12"" x 24"" Standard Trim Tab Kit without Switch Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down12-gauge (2.6 mm) laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware"
|
|
|
Bennett-Trim-Tabs
"16"" x 12"" Heavy Duty Racing Tab Kit with Tactile Switch"
Product Available:
YES
Sku Number:
MP63524039
Manufacturer ID:
RT16X12HD
UPC Number:
|
$
1064.94 |
|
|
"16"" x 12"" Heavy Duty Racing Tab Kit with Tactile Switch Racing TabsHeavy DutyExtreme-duty actuators with 316 stainless steel billet ram. 1" turned up edges with 2" taper on the inside. Full transom back plate and adjustable C channel mounting brackets with 5/16" stainless steel mounting studs. All 12-gauge 304 stainless steel construction with black powder coating.We make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's RT series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?All stainless steel construction (no dissimilar metals), sand blasting and powder coated for long lasting good looksActuator speed is precise and controllable so there are no surprises at top speedsModels have massive backplates and adjustable mounting channels with thru-bolted actuators for the ultimate in strength and reliabilityModels use solid stainless steel billet rams that are chemically polished for unsurpassed durabilityActuatorsInstant responseFully submersible, maintenance-free and sealed for lifeHigh-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case5/16" stainless steel boltsEach kit contains:2 actuators with stainless steel mounting bolts2 trim tab planesKits come pre-assembled"
|
|
|
Bennett-Trim-Tabs
"Trim Tab Kit 42"" x 9"" w/ Euro Rocker Switch"
Product Available:
YES
Sku Number:
MP63509502
Manufacturer ID:
429E
UPC Number:
|
$
743.94 |
|
|
"Trim Tab Kit 42"" x 9"" w/ Euro Rocker Switch Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.Standard Trim Tab KitBennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. The Euro-Style Rocker Switch is included with these trim tab sets. Kits are complete with all the necessary components for installation."
|
|
|
Lenco-Marine
Solenoid Valve - Red VP1135R
Product Available:
YES
Sku Number:
MP63509547
Manufacturer ID:
VP1135R
UPC Number:
|
$
42.94 |
|
|
Solenoid Valve - Red VP1135R BENNETT SOLENOID VALVE - RED VP1135R
|
|
|
Nauticus
12" x 18" Edgemount Trim Tab Kit without Switch
Product Available:
YES
Sku Number:
MP63524077
Manufacturer ID:
15017-101
UPC Number:
874847000413 |
$
553.94 |
|
|
12" x 18" Edgemount Trim Tab Kit without Switch Edge MountMounts the actuator at the trailing edge of the plane, requiring 4" less transom height than standard mountTrim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down12-gauge (2.6 mm) laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware
|
|
|
Minn-Kota
PR500 Trim Plate Retractor Kit
Product Available:
YES
Sku Number:
MP63527249
Manufacturer ID:
PR500
UPC Number:
698690500001 |
$
38.94 |
|
|
PR500 Trim Plate Retractor Kit PR500PR500 Pro Troller adapter kit for Smart Tabs series.Not only can the PR500 Plate Retractor Kit turn regular Smart Tabs into Pro Trollers, but by simply mounting the brackets the other way, you can turn any set of trim tabs into Plate Retractors!!! Now your trim tabs can be retracted to avoid damage while beaching your boat for some great summer fun or for that annual trip to the storage warehouse. And yes it is that simple!!!Kit contains to two adapters.(The PR500 replaces transom bracket #TB1007)Note: The PR500 is not compatible with the Smart Tabs SX Series trim tabs.
|
|
|
Nauticus
"Trim Tabs 12""x12"" Tabs Only"
Product Available:
YES
Sku Number:
EP104689457
Manufacturer ID:
1863540
UPC Number:
029402024247 |
$
124.94 |
|
|
"Trim Tabs 12""x12"" Tabs Only Composit Trim Tabs 12 x 12"" Minn Kota's Trims Tabs are injection molded for superior durability and corrosion resistance. Proprietary contoured shape includes flared edges that channel water down the length of the tab, delivering exceptional lift performance. Available in 6 tab sizes, with cord lengths of 9"" and 12"" and span lengths of 9"", 12"" and 18"".*Tabs only"
|
|
|
Lenco-Marine
SX9510-60 Smart Tab SX Composite Trim Tabs
Product Available:
YES
Sku Number:
MP63522502
Manufacturer ID:
SX9510-60
UPC Number:
698690951162 |
$
116.98 |
|
|
"SX9510-60 Smart Tab SX Composite Trim Tabs SX9510-60SX9510-60 Smart Tabs SX Series Trim TabsSmart Tabs SX Series for boats 15 - 19 ft with 60 - 140 hp motors.Smart Tabs SX Series from Nauticus, Inc.IMPROVES YOUR BOAT'S OVERALL PERFORMANCE - GUARANTEED!!!If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self adjust and performance better for less money? The NEW SX series incorporates all of the fully automatic features of our popular SMART TABS, in addition to the rust and corrosion free benefits of molded composite materials. Assembly can be completed in seconds and the installation in a few minutes. The only tools required are a drill with a 3/16"" bit and a phillips screw driver. SMART TABS SX provide un-equaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any power boat, and TRACKING RIBS have been added to improve handling at higher speeds.Our breakthrough technology in trim tabs is completely automatic requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat. The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. Reduce the minimum planning speed by up to 33%Faster AccelerationIncrease top speedProvide a level, more comfortable ride at lower speeds Improve fuel economy, handling and safetyNO HYDRAULICS - NO ELECTRIC SWITCHESNauticus trim tabs are completely automatic requiring no operator adjustment while underway. The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. (see installation instruction).SPEED REGULATIONNauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag. BOAT STABILIZERSEven when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking. ONE OF A KINDThe unique system is the only one of its kind in the industry. The internal valve system is truly ""smart"" in its design of controlling "
|
|
|
Bennett-Trim-Tabs
"33""-49"" Hatch Lift w/o Switch"
Product Available:
YES
Sku Number:
MP69480279
Manufacturer ID:
20776-001
UPC Number:
|
$
375.94 |
|
|
"33""-49"" Hatch Lift w/o Switch Hatch LiftsWe make the best boats better!™Lenco hatch lifts are designed to meet the specific needs of the marine industry. They are made entirely of non-corrosive materials and are completely submersible, ensuring that they will look and perform like new for many years of trouble free boating. Our inline motor design makes mounting easier and delivers over 750lbs. of lift. Lenco's clutchless ballscrew design always runs in sync on dual lift applications and never binds. Hatchlifts are operated by our optional single rocker switch #125.Ballscrew spins freely when hatch is fully opened or closed eliminating limit switches and burned out motors.Stainless steel pull pin is standard with optional stainless steel non-locking slide bracket availableStainless steel ram locks in any positionHigh-impact, 50% glass fiber-filled, ultraviolet-resistant nylon caseFast and powerful motor only draws 5 ampsLenco hatch lifts install with a single power cable saving hours on installation compared to hydraulics"
|
|
|
Nauticus
ATC/BPI Retrofit Kit AC2150
Product Available:
YES
Sku Number:
MP63509537
Manufacturer ID:
AC2150
UPC Number:
|
$
71.94 |
|
|
ATC/BPI Retrofit Kit AC2150 BENNETT ATC/BPI RETROFIT KIT AC2150
|
|
|
Lenco-Marine
ST780-20 Smart Tab Trim Tabs
Product Available:
YES
Sku Number:
MP63527239
Manufacturer ID:
M676BP
UPC Number:
698690780205 |
$
107.98 |
|
|
"ST780-20 Smart Tab Trim Tabs ST780-20ST780-20 Smart Tabs Trim TabsSmart Tabs Series for boats 10 - 12 ft with 8 - 18 hp motors.Smart Tabs from Nauticus, Inc.IMPROVES YOUR BOAT'S OVERALL PERFORMANCE - GUARANTEED!!!If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self adjust and perform better for less money? Our breakthrough technology in trim tabs is completely automatic requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat. The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. Reduce the minimum planning speed by up to 33%Faster AccelerationIncrease top speedProvide a level, more comfortable ride at lower speeds Improve fuel economy, handling and safetyNO HYDRAULICS - NO ELECTRIC SWITCHESNauticus trim tabs are completely automatic requiring no operator adjustment while underway. The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. (see installation instruction).SPEED REGULATEDNauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag. BOAT STABILIZERSEven when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking. ONE OF A KINDThe unique system is the only one of its kind in the industry. The internal valve system is truly ""smart"" in its design of controlling you boats performance. It will reduce the minimum planning speed by 33% Provide a level, more comfortable ride at lower speedsImprove economy, handling and safetyAs the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator load rating (maximum LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat.The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. Nauticus trim tabs provide smooth and undetectable reaction to boat speed creating a level, more comfortable ride"
|
|
|
Lenco-Marine
"Limited Space Trim Tab Kit 4"" X 12"" Limited Space Trim Tab Kit"
Product Available:
YES
Sku Number:
MP81125435
Manufacturer ID:
15052-101
UPC Number:
203774 |
$
503.94 |
|
|
"Limited Space Trim Tab Kit 4"" X 12"" Limited Space Trim Tab Kit Lenco Marine Inc Limited Space Trim Tab Kit - 4"" X 12"" LIMITED SPACE TRIM TAB KIT"
|
|
|
Bennett-Trim-Tabs
"9"" x 18"" Standard Trim Tab Kit with Tactile Switch"
Product Available:
YES
Sku Number:
MP63524060
Manufacturer ID:
TT9X18
UPC Number:
|
$
635.94 |
|
|
"9"" x 18"" Standard Trim Tab Kit with Tactile Switch Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down14-gauge laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware"
|
|
|
Lenco-Marine
Lower Hinge W/ Pin A1114
Product Available:
YES
Sku Number:
MP63496180
Manufacturer ID:
A1114
UPC Number:
|
$
7.24 |
|
|
Lower Hinge W/ Pin A1114 BENNETT LOWER HINGE W/ PIN A1114
|
|
|
Lenco-Marine
12" x 9" Edgemount Kit with Tactile Switch
Product Available:
YES
Sku Number:
MP63506170
Manufacturer ID:
TT12X9E
UPC Number:
|
$
624.94 |
|
|
12" x 9" Edgemount Kit with Tactile Switch Edge MountMounts the actuator at the trailing edge of the plane, requiring 4" less transom height than standard mountTrim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down12-gauge (2.6 mm) laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware
|
|
|
Lenco-Marine
20' Shielded Bridge Indicator (Key Pad And Wire
Product Available:
YES
Sku Number:
MP63512192
Manufacturer ID:
30041-002
UPC Number:
874847003032 |
$
188.94 |
|
|
20' Shielded Bridge Indicator (Key Pad And Wire LENCO 20' SHIELDED BRIDGE INDICATOR (KEY PAD AND WIRE
|
|
|
Lenco-Marine
12" x 9" Edgemount Trim Tab Kit with Indicator Switch
Product Available:
YES
Sku Number:
MP63524068
Manufacturer ID:
TT12X9EI
UPC Number:
|
$
808.94 |
|
|
12" x 9" Edgemount Trim Tab Kit with Indicator Switch Edge MountMounts the actuator at the trailing edge of the plane, requiring 4" less transom height than standard mountTrim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down12-gauge (2.6 mm) laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware
|
|
|
T-H
"12"" x 18"" Standard Trim Tab Kit with Indicator Switch"
Product Available:
YES
Sku Number:
MP63524078
Manufacturer ID:
TT12X18I
UPC Number:
|
$
873.94 |
|
|
"12"" x 18"" Standard Trim Tab Kit with Indicator Switch Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down12-gauge (2.6 mm) laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware"
|
|
|
Bennett-Trim-Tabs
Pt 35 Trim/tilt
Product Available:
YES
Sku Number:
EP104688802
Manufacturer ID:
52100
UPC Number:
739697521009 |
$
692.94 |
|
|
"Pt 35 Trim/tilt PT 35 Tilt N' Trim 35 hp and smaller. Travels at a 84&#deg; angle. Set back size of 5 1/2"". 12v electric hydraulic. Made of Extruded 6061 T6 Alum. Alloy. Comes with stainless steel. Fasteners. 24 lbs."
|
|
|
Lenco-Marine
Upper Hinge A1103
Product Available:
YES
Sku Number:
MP63509540
Manufacturer ID:
A1103
UPC Number:
|
$
14.94 |
|
|
Upper Hinge A1103 BENNETT UPPER HINGE A1103
|
|
|
Lenco-Marine
Key Pad f/ Indicator Tab Controller
Product Available:
YES
Sku Number:
MP68936602
Manufacturer ID:
30007-001
UPC Number:
874847001397 |
$
73.94 |
|
|
Key Pad f/ Indicator Tab Controller Lenco Key Pad f/ Indicator Tab Controller
|
|
|
Lenco-Marine
"Extreme Duty Acuator - 12v - 4 1/4"" Stroke"
Product Available:
YES
Sku Number:
MP63816754
Manufacturer ID:
15060-001
UPC Number:
874847001250 |
$
258.94 |
|
|
"Extreme Duty Acuator - 12v - 4 1/4"" Stroke 102 XD ActuatorUsed with Troll?n Tab Kits prior to 20005/16"" (.79 cm) mounting hardware Stroke: 4-1/4"" (10.8 cm)Length overall: 12-7/8"" (32.70 cm)Length pin to pin: 12-1/4"" (31.11 cm)Diameter (upper housing): 2-1/2"" (6.35 cm)Mounting hardware: 5/16"" (.79 cm) or Delrin Pin (Part #15087-001)Part ##15060-001 (102-2) 12 Volt w/6' (1.83m) leads with Deutsch connectors (replacement length)Top cap gland seal sheaths the actuator cable outer jacket as well as both internal conductors for maximum waterproofingCorrosion proof Vandar mounts Stainless steel ram won't flex, even under extreme loadsDouble O-ring for maximum protectionBallscrew rotates freely on 12 ball bearings at both ends of its stroke so there's no need for complicated limit switches and clutchesSelf-locking ballscrew locks into position and will not driftPrecision molded, powdered metal, high alloy gears provide high accuracy, high wear resistance, and high strength for long lifeTough, high-torque motor easily transfers 750 lbsHigh-impact, ultraviolet resistant nylon 66, 50% glass fiber reinforced thermoplastic housingCorrosion proof Vandar cap and mount, stands up to severe loads"
|
|
|
Bennett-Trim-Tabs
Brain Box For Tactile Tab Controller
Product Available:
YES
Sku Number:
MP63524017
Manufacturer ID:
30134-001
UPC Number:
874847001458 |
$
115.94 |
|
|
Brain Box For Tactile Tab Controller LENCO BRAIN BOX FOR TACTILE TAB CONTROLLER
|
|
|
Lenco-Marine
"Trim Tab Kit 24"" x 12"" w/ Euro Rocker Switch"
Product Available:
YES
Sku Number:
MP63496135
Manufacturer ID:
2412E
UPC Number:
|
$
679.94 |
|
|
"Trim Tab Kit 24"" x 12"" w/ Euro Rocker Switch Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.Standard Trim Tab KitBennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. The Euro-Style Rocker Switch is included with these trim tab sets. Kits are complete with all the necessary components for installation."
|
|
|
Boat-Leveler
12" x 12" Edgemount Trim Tab Kit w/ Tactile Switch
Product Available:
YES
Sku Number:
MP63524070
Manufacturer ID:
TT12X12E
UPC Number:
|
$
638.94 |
|
|
12" x 12" Edgemount Trim Tab Kit w/ Tactile Switch Edge MountMounts the actuator at the trailing edge of the plane, requiring 4" less transom height than standard mountTrim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down14-gauge laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware
|
|
|
Lenco-Marine
Motor Cover White Reservoir
Product Available:
YES
Sku Number:
MP81125440
Manufacturer ID:
12657A
UPC Number:
42217 |
$
49.94 |
|
|
Motor Cover White Reservoir Boat Leveler Motor Cover - WHITE RESERVOIR
|
|
|
Lenco-Marine
"12"" x 30"" Standard Trim Tab Kit with Tactile Switch"
Product Available:
YES
Sku Number:
MP63524085
Manufacturer ID:
TT12X30
UPC Number:
|
$
765.94 |
|
|
"12"" x 30"" Standard Trim Tab Kit with Tactile Switch Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down12-gauge (2.6 mm) laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware"
|
|
|
Boat-Leveler-Co
"18"" x 14"" Heavy Duty Racing Tab Kit with Tactile Switch"
Product Available:
YES
Sku Number:
MP63524045
Manufacturer ID:
RT18X14HD
UPC Number:
|
$
1152.94 |
|
|
"18"" x 14"" Heavy Duty Racing Tab Kit with Tactile Switch Racing TabsHeavy DutyExtreme-duty actuators with 316 stainless steel billet ram. 1" turned up edges with 2" taper on the inside. Full transom back plate and adjustable C channel mounting brackets with 5/16" stainless steel mounting studs. All 12-gauge 304 stainless steel construction with black powder coating.We make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's RT series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?All stainless steel construction (no dissimilar metals), sand blasting and powder coated for long lasting good looksActuator speed is precise and controllable so there are no surprises at top speedsModels have massive backplates and adjustable mounting channels with thru-bolted actuators for the ultimate in strength and reliabilityModels use solid stainless steel billet rams that are chemically polished for unsurpassed durabilityActuatorsInstant responseFully submersible, maintenance-free and sealed for lifeHigh-impact, 50% glass fiber-filled, ultrabiolet-resistant nylon case5/16" stainless steel boltsEach kit contains:2 actuators with stainless steel mounting bolts2 trim tab planesKits come pre-assembled"
|
|
|
Lenco-Marine
Universal Motor
Product Available:
YES
Sku Number:
MP63509283
Manufacturer ID:
12700UNIV
UPC Number:
000000162197 |
$
272.94 |
|
|
"Universal Motor Universal Motor PumpPump has adjustable pressure relief valve set at 400psi.Builit in bypass so fluid circulates so that pump will not stall.Motor has thermal overload protection.Includes all necessary fittings for a 12 volt single cylinder system.Kit contains Biodegradable oil and funnel.Heavy duty solenoid vales that lock cylinder in place.18"" wire harness with color coding instructions for other brands.Installation Instructions"
|
|
|
Lenco-Marine
Upper Mounting Bracket F/ Bennett Retro Kit (3
Product Available:
YES
Sku Number:
MP63816755
Manufacturer ID:
15085-001
UPC Number:
874847004961 |
$
11.94 |
|
|
Upper Mounting Bracket F/ Bennett Retro Kit (3 LENCO UPPER MOUNTING BRACKET F/ BENNETT RETRO KIT (3
|
|
|
Nauticus
"Standard Trim Tab Kits Trim Tab Kit 12X30"" W/O Switch"
Product Available:
YES
Sku Number:
MP81125387
Manufacturer ID:
15010-101
UPC Number:
155107 |
$
682.94 |
|
|
"Standard Trim Tab Kits Trim Tab Kit 12X30"" W/O Switch Lenco Marine Inc Standard Trim Tab Kits - TRIM TAB KIT 12X30"" W/O SWITCH"
|
|
|
Bennett-Trim-Tabs
ST1610-120 Smart Tabs II Series Trim Tabs
Product Available:
YES
Sku Number:
MP63527245
Manufacturer ID:
ST1610-120
UPC Number:
698690161066 |
$
339.94 |
|
|
"ST1610-120 Smart Tabs II Series Trim Tabs ST1610-120ST1610-120 Smart Tabs II Series Trim TabsSmart Tabs II Series for boats 23 to 30 ft weighing up to 6500 lbsSmart Tabs II Series from Nauticus, Inc.IMPROVES YOUR BOATS OVERALL PERFORMANCE - GUARANTEED!!!If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self adjust and performance better for less money? Designed for boats 23' - 30' weighing up to 6500 lbs The ST 1610 Series is ideal for low profile Fiber Glass, Aluminum, and RIB design boat with transom widths less than 10 feet (trailerable boats). This heavy duty system provides an active suspension system for the boat that increases stability and smooths the ride even in rough seas. Easier planning at slower speeds, increased payload performance, improved tracking and handling are available automatically without the need for pilot interface. No switches, no electric or hydraulic connections, and no maintenance. Just get in and go! Specially designed for boats between 23' and 30"", under 10' in width, and up to 8,500 Lbs gross weight. The ST1610 series features two nitrogen gas actuators per plate providing increased stern lift and twice the reactive dampening, eliminating any instant changes from water pressure variances. This fully automatic and active system provides smooth and undetectable reaction to boat speed, and water conditions creating a level more comfortable ride.Our breakthrough technology in trim tabs is completely automatic requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat. The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. Reduce the minimum planning speed by up to 33%Faster AccelerationIncrease top speedProvide a level, more comfortable ride at lower speeds Improve fuel economy, handling and safetyNO HYDRAULICS - NO ELECTRIC SWITCHESNauticus trim tabs are completely automatic requiring no operator adjustment while underway. The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. (see installation instruction).SPEED REGULATIONNauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag. BOAT ST"
|
|
|
Bennett-Trim-Tabs
"Marine 10"" x 12"" Tournament Trim Tab Kit"
Product Available:
YES
Sku Number:
MP63509533
Manufacturer ID:
BT1012
UPC Number:
|
$
655.94 |
|
|
"Marine 10"" x 12"" Tournament Trim Tab Kit Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.Tournament TabsHigh bow on take-off, pounding, porpoising, and excessive use of the engine's power trim are factors reducing the efficiency of high performance fishing boats. You may also find yourself needing a high throttle setting just to stay on plane. With a unique batwing design and a high tech black powder coated finish, Tournament Tabs are engineered to fit your small boat. They increase stability, versatility, and overall performance, helping your boat run on plane in shallow water even at slower speeds. Tournament Tabs are hydraulically adjustable, putting total attitude control at your fingertips."
|
|
|
Lenco-Marine
"Trim Tab Kit 42"" x 9"" w/o Control"
Product Available:
YES
Sku Number:
MP63509516
Manufacturer ID:
429
UPC Number:
|
$
668.94 |
|
|
"Trim Tab Kit 42"" x 9"" w/o Control Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.Standard Trim Tab KitBennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. Kits are complete with all the necessary components for installation."
|
|
|
Boat-Leveler-Co
12"x12" Trim Tab Kit with Tactile Switch
Product Available:
YES
Sku Number:
MP63492160
Manufacturer ID:
TT12X12
UPC Number:
|
$
638.94 |
|
|
12"x12" Trim Tab Kit with Tactile Switch TT12x12SwitchTactileBoat Length17'-30'Tab Length12"Tab Width12"Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down14-gauge laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware
|
|
|
Bennett
"18"" x 8"" Trim Tab Set"
Product Available:
YES
Sku Number:
MP63509282
Manufacturer ID:
N188000
UPC Number:
000000162180 |
$
527.94 |
|
|
"18"" x 8"" Trim Tab Set Features:WiringColor-coded wiring in 25' to 40' lengths with quick connects fittings, meets federal standards for heat, pull and insulation, making installation easy.SolenoidsThey are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type hose fittings provide tight, secure connections.MotorA powerhouse with coated wirings and a thermal overload that resists temperature and amperage build-up. 1 3/4" stack windings and top mounting eliminated oil leakage. The motor is mounted with stainless steel nuts and bolts, and is easily disassembled.BracketsSwivel type brackets allow cylinders to be mounted an adjusted to any angle. Knockout pins act as shear pins it tab strikes an object.PumpDesigned and engineered exclusively by Instatrim. The built-in bypass is factory set at 400 P.S.I. tolerance held to .00025. Amperage doesn't exceed 16 because the unit circulates oil, rather than stalling out or trying to pump additional pressure.Motor Cover4 1/2" D x 6" W x 11"H, high impact ABS plastic cover with a built-in oil reservoir mounts easily with two screws. The filler is located in front. Our cover protects the motor from occasional wash down. CylindersImpact resistant, fiberglass reinforced nylon cylinders eliminates expansion and resists ultra-violet rays. Two expanding type seals, plus O-ring, eliminates high and low pressure leaks. Barbed cylinder fitting and an inserted tubular rod prevents hose blow-off and breakage. A stainless steel spring retracts the cylinder when the boat is not in motion.Trim Tabs12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim's hinges prevent most spray and can be used for transom or bottom mounting.HoseDesigned and manufactured exclusively for Insta-Trim with nylon-reinforced webbing and protective PVC coating. Rated at 2000 lb. burst pressure, 15' of hose is supplied for your system. Entering the transom 6" above the water line, the hoses are held securely with hose trim.Stainless steel clamps hold the hose to barb fitting at the solenoid. Rocker Type ControlsMounted on the dash they are easy to operate. 2TP Micro switch with silver contact points adjust the tabs for maximum control and performance.One pint of Insta-Trim biodegradable transmission oil, funnel and mounting hardware is supplied."
|
|
|
Lenco-Marine
Hinges Lower Hinge Only For Actuator
Product Available:
YES
Sku Number:
MP80820555
Manufacturer ID:
A1113
UPC Number:
666285315606 |
$
7.82 |
|
|
Hinges Lower Hinge Only For Actuator Bennett Hinges - LOWER HINGE ONLY FOR ACTUATOR
|
|
|
Lenco-Marine
30' Shielded Bridge Indicator (Key Pad And Wire
Product Available:
YES
Sku Number:
MP63492085
Manufacturer ID:
30041-003
UPC Number:
874847002776 |
$
204.94 |
|
|
30' Shielded Bridge Indicator (Key Pad And Wire LENCO 30' SHIELDED BRIDGE INDICATOR (KEY PAD AND WIRE
|
|
|
Boat-Leveler-Co
Trim Tab Actuators Upper Mounting Bracket
Product Available:
YES
Sku Number:
MP81125369
Manufacturer ID:
50015-001
UPC Number:
155080 |
$
11.94 |
|
|
Trim Tab Actuators Upper Mounting Bracket Racor Racor 220R 225R Diesel Filter - Replacement Parts - AMBER BOWL F/ 220/227
|
|
|
Minn-Kota
Hydraulic Hose Insta Trim # 12728 *Per Foot
Product Available:
YES
Sku Number:
MP63495874
Manufacturer ID:
12728
UPC Number:
000000162234 |
$
3.55 |
|
|
Hydraulic Hose Insta Trim # 12728 *Per Foot BOAT LEVELER HYDRAULIC HOSE INSTA TRIM # 12728 *PER FOOT
|
|
|
Bennett-Trim-Tabs
"Trim Tabs 9""x12"" Tabs Only"
Product Available:
YES
Sku Number:
EP104689454
Manufacturer ID:
1863510
UPC Number:
029402024155 |
$
101.94 |
|
|
"Trim Tabs 9""x12"" Tabs Only Composit Trim Tabs 9"" x 12"" Minn Kota's Trims Tabs are injection molded for superior durability and corrosion resistance. Proprietary contoured shape includes flared edges that channel water down the length of the tab, delivering exceptional lift performance. Available in 6 tab sizes, with cord lengths of 9"" and 12"" and span lengths of 9"", 12"" and 18"".*Tabs onlyF E A T U R E S"
|
|
|
Lenco-Marine
Upper Hinge A1103Ex External Line
Product Available:
YES
Sku Number:
MP63488739
Manufacturer ID:
A1103EX
UPC Number:
|
$
14.94 |
|
|
Upper Hinge A1103Ex External Line BENNETT UPPER HINGE A1103EX EXTERNAL LINE
|
|
|
Bennett-Trim-Tabs
Trolling Tab Remote Control Accessory
Product Available:
YES
Sku Number:
MP63524052
Manufacturer ID:
30121-001
UPC Number:
874847001946 |
$
260.94 |
|
|
Trolling Tab Remote Control Accessory LENCO TROLLING TAB REMOTE CONTROL ACCESSORY
|
|
|
Bennett-Trim-Tabs
Electronic Indicator Control Kit
Product Available:
YES
Sku Number:
MP63524362
Manufacturer ID:
EIC5000
UPC Number:
666285222300 |
$
260.98 |
|
|
Electronic Indicator Control Kit BENNETT ELECTRONIC INDICATOR CONTROL KIT
|
|
|
Boat-Leveler-Co
M120 Sport Tab System w/ Electronic Indicator Control
Product Available:
YES
Sku Number:
MP63524392
Manufacturer ID:
M120EIC
UPC Number:
|
$
831.94 |
|
|
M120 Sport Tab System w/ Electronic Indicator Control M120 Sport Tab SystemBennett's new M120 Sport Tabs are ideal for boats in the 17' - 23' range. Their unique Batwing design provides 30% more lift than conventional Trim Tabs. Space saving design insures easy installation on virtually any transom.Designed with ease of installation in mind the M120 Kits include an installation video.
|
|
|
Lenco-Marine
Waterproof Trim Tab Switch
Product Available:
YES
Sku Number:
MP63509286
Manufacturer ID:
2002TTC
UPC Number:
000000162258 |
$
119.94 |
|
|
Waterproof Trim Tab Switch Waterproof Trim Tab SwitchEasily installed with a 1.5 inch hole sawAdapt to other brands of trim tabsSealed between the switch and the dashboardNo interrupter relays availableUses quick connect spade terminals for fast installationAttractive designLonger lasting than conventional "rocker switches"
|
|
|
Lenco-Marine
"12"" x 12"" Racing Tab Kit with Indicator Switch"
Product Available:
YES
Sku Number:
MP63524036
Manufacturer ID:
RT12X12I
UPC Number:
|
$
900.94 |
|
|
"12"" x 12"" Racing Tab Kit with Indicator Switch Racing TabsStandard DutyStandard actuator with 5/16" stainless steel through bolts. 1" turned up edges with 2" taper on the inside. All 12-gauge 304 stainless steel construction with black powder coating.We make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's RT series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?All stainless steel construction (no dissimilar metals), sand blasting and powder coated for long lasting good looksActuator speed is precise and controllable so there are no surprises at top speedsEach kit contains:2 actuators with stainless steel mounting bolts2 trim tab planesstainless steel mounting screws"
|
|
|
Bennett-Trim-Tabs
9" x 9" Edgemount Trim Tab Kit with Tactile Switch
Product Available:
YES
Sku Number:
MP63524054
Manufacturer ID:
TT9X9E
UPC Number:
|
$
600.94 |
|
|
9" x 9" Edgemount Trim Tab Kit with Tactile Switch Edge MountMounts the actuator at the trailing edge of the plane, requiring 4" less transom height than standard mountTrim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down14-gauge laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware
|
|
|
Lenco-Marine
"Trim Tab Kit 30"" x 9"" w/o Control"
Product Available:
YES
Sku Number:
MP63509514
Manufacturer ID:
309
UPC Number:
|
$
611.94 |
|
|
"Trim Tab Kit 30"" x 9"" w/o Control Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.Standard Trim Tab KitBennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. Kits are complete with all the necessary components for installation."
|
|
|
Minn-Kota
"18"" x 14"" Racing Tab Kit with Tactile Switch"
Product Available:
YES
Sku Number:
MP63499421
Manufacturer ID:
RT18X14
UPC Number:
|
$
905.94 |
|
|
"18"" x 14"" Racing Tab Kit with Tactile Switch Racing TabsStandard DutyStandard actuator with 5/16" stainless steel through bolts. 1" turned up edges with 2" taper on the inside. All 12-gauge 304 stainless steel construction with black powder coating.We make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's RT series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?All stainless steel construction (no dissimilar metals), sand blasting and powder coated for long lasting good looksActuator speed is precise and controllable so there are no surprises at top speedsActuatorsInstant responseFully submersible, maintenance-free and sealed for lifeHigh-impact, 50% glass fiber-filled, ultraviolet-resistant nylon caseEach kit contains:2 actuators with stainless steel mounting bolts2 trim tab planes Stainless steel mounting screws"
|
|
|
Lenco-Marine
"Trim Tab Standard Stroke Actuator 15"" Min Transom Ht"
Product Available:
YES
Sku Number:
EP104689460
Manufacturer ID:
1863755
UPC Number:
029402024384 |
$
441.94 |
|
|
"Trim Tab Standard Stroke Actuator 15"" Min Transom Ht Standard & Short Stroke Actuators Standard Stroke Powered by fully sealed 12 volt DC motors, our actuators raise and lower the tabs using a heavy duty mechanical gear system. Faster, more responsive and easier to install than hydraulic systems, they are also quieter than other electro mechanical actuators on the market. Each actuator features a dual o ring design with integrated wiper that cleans debris from ram as it extends and retracts for years of reliable performance."
|
|
|
API
"18""X14"" Racing Tab Kit W/O Switch Rt18X14Ns"
Product Available:
YES
Sku Number:
MP63524048
Manufacturer ID:
15040-101
UPC Number:
874847004626 |
$
770.94 |
|
|
"18""X14"" Racing Tab Kit W/O Switch Rt18X14Ns LENCO 18""X14"" RACING TAB KIT W/O SWITCH RT18X14NS"
|
|
|
Lenco-Marine
Tilt Trim Motors Tilt/Trim Motor, Volvo# 839432
Product Available:
YES
Sku Number:
MP81125409
Manufacturer ID:
PT401NM
UPC Number:
161679 |
$
290.94 |
|
|
Tilt Trim Motors Tilt/Trim Motor, Volvo# 839432 API Marine API Tilt Trim Motors - TILT/TRIM MOTOR, VOLVO# 839432
|
|
|
Nauticus
Standard Upper Mounting Bracket (3 Screw 1
Product Available:
YES
Sku Number:
MP63524010
Manufacturer ID:
50015-001
UPC Number:
874847001304 |
$
11.94 |
|
|
Standard Upper Mounting Bracket (3 Screw 1 LENCO STANDARD UPPER MOUNTING BRACKET (3 SCREW 1
|
|
|
Bennett-Trim-Tabs
PT9510-40 SX ProTroller Series Trim Tabs
Product Available:
YES
Sku Number:
MP63518761
Manufacturer ID:
PT9510-40
UPC Number:
698690951407 |
$
184.94 |
|
|
"PT9510-40 SX ProTroller Series Trim Tabs PT9510-40PT9510-40 Smart Tabs SX Series Trim TabsSmart Tabs SX Series for boats 14 - 17 ft with 40 - 80 hp motors.Smart Tabs SX Series from Nauticus, Inc.Trolling Brakes and Trim Tabs All in One! The ProTroller series incorporates the ability to turn SMART TABS into trolling brakes. By simply moving a lever up or down, ProTroller Smart Tabs switch between the most effective trim and stabilizer system on the market to the most effective trolling brakes on the market.TROLLING BRAKES:With the levers in the down position, the plates drop down to create equal braking on both sides of the boats, providing the added benefit of tracking straight at ultra low speeds. Steering control is maintained because the propeller is not restricted, as with other systems.TRIM TABS:Move the lever up to the running position and enjoy the performance and efficiency of automatic trim tabs. Better ride and handling, faster acceleration, more top speed, and better fuel economy are only a few of the benefits you get with SMART TABS. Not only are they completely automatic, but they can be fine tuned to each boat and to the boaters preference. This unlimited versatility provides performance enhancement unmatched by any other product, and it's GUARANTEED! IMPROVES YOUR BOAT'S OVERALL PERFORMANCE - GUARANTEED!!!If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self adjust and performance better for less money? The NEW SX series incorporates all of the fully automatic features of our popular SMART TABS, in addition to the rust and corrosion free benefits of molded composite materials. Assembly can be completed in seconds and the installation in a few minutes. The only tools required are a drill with a 3/16"" bit and a phillips screw driver. SMART TABS SX provide un-equaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any power boat, and TRACKING RIBS have been added to improve handling at higher speeds.Our breakthrough technology in trim tabs is completely automatic requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat. The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. Reduce the minimum planning speed by up to 33%Faster AccelerationIncrease top speedProvide a level, more comfortable ride at lower speeds Improve fuel economy, handling and safetyNO HYDRAULICS - NO ELECTRIC SWITCHESNauticus trim tabs are completely automatic requiring no operator adjustment while underway. The nitrogen Gas Actuator provides LIFT at "
|
|
|
Boat-Leveler
ES2000 Euro Style Rocker Switch
Product Available:
YES
Sku Number:
MP63509534
Manufacturer ID:
ES2000
UPC Number:
|
$
69.94 |
|
|
"ES2000 Euro Style Rocker Switch Euro-Style Rocker Switch ControlThis control is ergonomically designed, water resistant and provides a positive ""click"" when the trim tabs are engaged. Its lockout feature prevents user from pressing down on opposite directions at the same time. The control is easy to install, fitting into any existing Bennett 2 1/2-inch Rocker Switch hole."
|
|
|
Bennett-Trim-Tabs
Rocker Type Controls Complete Set Of Switches (Rocker)
Product Available:
YES
Sku Number:
MP81125338
Manufacturer ID:
12725
UPC Number:
03427 |
$
121.94 |
|
|
Rocker Type Controls Complete Set Of Switches (Rocker) Boat Leveler Rocker Type Controls - COMPLETE SET OF SWITCHES (ROCKER)
|
|
|
Lenco-Marine
Actuator Assembly A1200S
Product Available:
YES
Sku Number:
MP63496182
Manufacturer ID:
A1200S
UPC Number:
|
$
74.94 |
|
|
Actuator Assembly A1200S BENNETT ACTUATOR ASSEMBLY A1200S
|
|
|
Bennett-Trim-Tabs
10' Shielded Bridge Standard (Key Pad And Wire
Product Available:
YES
Sku Number:
MP63524018
Manufacturer ID:
30041-101
UPC Number:
874847004107 |
$
129.94 |
|
|
10' Shielded Bridge Standard (Key Pad And Wire LENCO 10' SHIELDED BRIDGE STANDARD (KEY PAD AND WIRE
|
|
|
Nauticus
"Trim Tab 12"" x 16"" Sport Tab System"
Product Available:
YES
Sku Number:
MP63509531
Manufacturer ID:
ST16
UPC Number:
|
$
943.94 |
|
|
"Trim Tab 12"" x 16"" Sport Tab System Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.Sport TabsBacked by nearly 40 years of trim tabexperience, Bennett Sport Tabs areengineered for the demands of offshoreattitude correction. Performance boats thatare run at speeds of 60 mph require therugged construction and enjoy thesophisticated black powder coated finish ofSport Tabs. Manufactured with heavy gaugereinforced stainless steel and powerful dualhydraulic actuators, Sport Tabs combinestrength, durability, and good looks to achieve your boat's maximum potential."
|
|
|
Boat-Leveler-Co
PT1290-60 Pro Troller Smart Tabs Series
Product Available:
YES
Sku Number:
MP63527247
Manufacturer ID:
PT1290-60
UPC Number:
698690129608 |
$
252.94 |
|
|
PT1290-60 Pro Troller Smart Tabs Series PT1290-60PT1290-60 Smart Tabs Trim TabsPro Troller Smart Tabs Series for boats 15 - 18+ ft with 60 - 150 hp motors.Smart Tabs Pro Troller from Nauticus, Inc.Trolling Brakes and Trim Tabs All in One! The ProTroller series incorporates the ability to turn SMART TABS into trolling brakes. By simply moving a lever up or down, ProTroller Smart Tabs switch between the most effective trim and stabilizer system on the market to the most effective trolling brakes on the market.TROLLING BRAKES:With the levers in the down position, the plates drop down to create equal braking on both sides of the boats, providing the added benefit of tracking straight at ultra low speeds. Steering control is maintained because the propeller is not restricted, as with other systems.TRIM TABS:Move the lever up to the running position and enjoy the performance and efficiency of automatic trim tabs. Better ride and handling, faster acceleration, more top speed, and better fuel economy are only a few of the benefits you get with SMART TABS. Not only are they completely automatic, but they can be fine tuned to each boat and to the boaters preference. This unlimited versatility provides performance enhancement unmatched by any other product, and it's GUARANTEED! IMPROVES YOUR BOAT?S OVERALL PERFORMANCE GUARANTEED!!!If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self adjust and performance better for less money? Our breakthrough technology in trim tabs is completely automatic requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat. The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. Reduce the minimum planning speed by up to 33%Faster AccelerationIncrease top speedProvide a level, more comfortable ride at lower speeds Improve fuel economy, handling and safetyNO HYDRAULICS - NO ELECTRIC SWITCHESNauticus trim tabs are completely automatic requiring no operator adjustment while underway. The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. (see installation instruction).SPEED REGULATIONNauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a hori
|
|
|
Bennett-Trim-Tabs
"12"" x 8"" Trim Tab Set"
Product Available:
YES
Sku Number:
MP63502961
Manufacturer ID:
N128000
UPC Number:
000000162098 |
$
494.94 |
|
|
"12"" x 8"" Trim Tab Set Features:WiringColor-coded wiring in 25' to 40' lengths with quick connects fittings, meets federal standards for heat, pull and insulation, making installation easy.SolenoidsThey are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type hose fittings provide tight, secure connections.MotorA powerhouse with coated wirings and a thermal overload that resists temperature and amperage build-up. 1 3/4" stack windings and top mounting eliminated oil leakage. The motor is mounted with stainless steel nuts and bolts, and is easily disassembled.BracketsSwivel type brackets allow cylinders to be mounted an adjusted to any angle. Knockout pins act as shear pins it tab strikes an object.PumpDesigned and engineered exclusively by Instatrim. The built-in bypass is factory set at 400 P.S.I. tolerance held to .00025. Amperage doesn't exceed 16 because the unit circulates oil, rather than stalling out or trying to pump additional pressure.Motor Cover4 1/2" D x 6" W x 11"H, high impact ABS plastic cover with a built-in oil reservoir mounts easily with two screws. The filler is located in front. Our cover protects the motor from occasional wash down. CylindersImpact resistant, fiberglass reinforced nylon cylinders eliminates expansion and resists ultra-violet rays. Two expanding type seals, plus O-ring, eliminates high and low pressure leaks. Barbed cylinder fitting and an inserted tubular rod prevents hose blow-off and breakage. A stainless steel spring retracts the cylinder when the boat is not in motion.Trim Tabs12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim's hinges prevent most spray and can be used for transom or bottom mounting.HoseDesigned and manufactured exclusively for Insta-Trim with nylon-reinforced webbing and protective PVC coating. Rated at 2000 lb. burst pressure, 15' of hose is supplied for your system. Entering the transom 6" above the water line, the hoses are held securely with hose trim.Stainless steel clamps hold the hose to barb fitting at the solenoid. Rocker Type ControlsMounted on the dash they are easy to operate. 2TP Micro switch with silver contact points adjust the tabs for maximum control and performance.One pint of Insta-Trim biodegradable transmission oil, funnel and mounting hardware is supplied."
|
|
|
Lenco-Marine
V351HPU1 Hydraulic Power Unit - 12v
Product Available:
YES
Sku Number:
MP63509545
Manufacturer ID:
V351HPU1
UPC Number:
|
$
286.94 |
|
|
"V351HPU1 Hydraulic Power Unit - 12v Hydraulic Power UnitA compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance. Installs easily with sturdy mounting bracket.Measures 4"" x 7 1/2"" x 5 1/2"". Uses automatic transmission fluid. Includes pump, solenoid valves, reservoir and cover."
|
|
|
Bennett
"12"" x 24"" Super Strong Trim Tab Kit with Indicator Switch"
Product Available:
YES
Sku Number:
MP63512271
Manufacturer ID:
TT12X24SSI
UPC Number:
|
$
1319.94 |
|
|
"12"" x 24"" Super Strong Trim Tab Kit with Indicator Switch Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down12-gauge (2.6 mm) laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware"
|
|
|
Lenco-Marine
Rocker Switch Control Euro Style Waterproof Rocker Switch
Product Available:
YES
Sku Number:
MP81125413
Manufacturer ID:
ES2000
UPC Number:
165880 |
$
85.94 |
|
|
Rocker Switch Control Euro Style Waterproof Rocker Switch Bennett Rocker Switch Control - EURO STYLE WATERPROOF ROCKER SWITCH
|
|
|
Boat-Leveler-Co
"12"" x 18"" Super Strong Trim Tab Kit with Tactile Switch"
Product Available:
YES
Sku Number:
MP63524080
Manufacturer ID:
TT12X18SS
UPC Number:
|
$
1016.94 |
|
|
"12"" x 18"" Super Strong Trim Tab Kit with Tactile Switch Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down12-gauge (2.6 mm) laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware"
|
|
|
Lenco-Marine
Electronics Tab Locator
Product Available:
YES
Sku Number:
MP63509288
Manufacturer ID:
2900WBL
UPC Number:
000000162289 |
$
304.94 |
|
|
Electronics Tab Locator Insta-Trim boat leveler's electronic tab locator shows theposition of your tabs. Two seperate lines of diode lampsaccurately indicate the position of each tab. the screen issmall, mounts on the dashboard, and is designed tomatch your rocker type controls in size and appearance.The detectors are rugged and attach easily and quickly toeach hydraulic cylinder. The attached readout line runsup to the light panel with simple plug in connections.Insta-Trim electonic tab locators can be added to yourexisting boat leveler system, upgrading your system for abetter, more accurate performance.Installation is quick, easy, and simple. Only a fewcommon tools are rquired, and the tab locators comewith easy to follow instructions.
|
|
|
API
"41""-65"" Hatch Lift w/o Switch"
Product Available:
YES
Sku Number:
MP63520668
Manufacturer ID:
20784-001
UPC Number:
|
$
444.94 |
|
|
"41""-65"" Hatch Lift w/o Switch Hatch LiftsWe make the best boats better!™Lenco hatch lifts are designed to meet the specific needs of the marine industry. They are made entirely of non-corrosive materials and are completely submersible, ensuring that they will look and perform like new for many years of trouble free boating. Our inline motor design makes mounting easier and delivers over 750lbs. of lift. Lenco's clutchless ballscrew design always runs in sync on dual lift applications and never binds. Hatchlifts are operated by our optional single rocker switch #125.Ballscrew spins freely when hatch is fully opened or closed eliminating limit switches and burned out motors.Stainless steel pull pin is standard with optional stainless steel non-locking slide bracket availableStainless steel ram locks in any positionHigh-impact, 50% glass fiber-filled, ultraviolet-resistant nylon caseFast and powerful motor only draws 5 ampsLenco hatch lifts install with a single power cable saving hours on installation compared to hydraulics"
|
|
|
Nauticus
Tilt Trim Motors Tilt/Trim, 2 Wire Motor Only
Product Available:
YES
Sku Number:
MP81125407
Manufacturer ID:
PT607NM
UPC Number:
161502 |
$
183.94 |
|
|
Tilt Trim Motors Tilt/Trim, 2 Wire Motor Only API Marine API Tilt Trim Motors - TILT/TRIM, 2 WIRE MOTOR ONLY
|
|
|
API
PT980-40 Pro Troller Smart Tabs Series
Product Available:
YES
Sku Number:
MP63494854
Manufacturer ID:
K-18
UPC Number:
698690998402 |
$
189.94 |
|
|
PT980-40 Pro Troller Smart Tabs Series PT980-40PT980-40 Smart Tabs Trim TabsPro Troller Smart Tabs Series for boats 12 - 16 ft with 40 - 80 hp motors.Smart Tabs Pro Troller from Nauticus, Inc.Trolling Brakes and Trim Tabs All in One! The ProTroller series incorporates the ability to turn SMART TABS into trolling brakes. By simply moving a lever up or down, ProTroller Smart Tabs switch between the most effective trim and stabilizer system on the market to the most effective trolling brakes on the market.TROLLING BRAKES:With the levers in the down position, the plates drop down to create equal braking on both sides of the boats, providing the added benefit of tracking straight at ultra low speeds. Steering control is maintained because the propeller is not restricted, as with other systems.TRIM TABS:Move the lever up to the running position and enjoy the performance and efficiency of automatic trim tabs. Better ride and handling, faster acceleration, more top speed, and better fuel economy are only a few of the benefits you get with SMART TABS. Not only are they completely automatic, but they can be fine tuned to each boat and to the boaters preference. This unlimited versatility provides performance enhancement unmatched by any other product, and it's GUARANTEED! IMPROVES YOUR BOAT'S OVERALL PERFORMANCE GUARANTEED!!!If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self adjust and performance better for less money? Our breakthrough technology in trim tabs is completely automatic requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat. The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. Reduce the minimum planning speed by up to 33%Faster AccelerationIncrease top speedProvide a level, more comfortable ride at lower speeds Improve fuel economy, handling and safetyNO HYDRAULICS - NO ELECTRIC SWITCHESNauticus trim tabs are completely automatic requiring no operator adjustment while underway. The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. (see installation instruction).SPEED REGULATIONNauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizonta
|
|
|
Lenco-Marine
Tilt Trim Motors Tilt/Trim Motor, Volvo# 897720-11
Product Available:
YES
Sku Number:
MP81125411
Manufacturer ID:
PT403NM
UPC Number:
161682 |
$
290.94 |
|
|
Tilt Trim Motors Tilt/Trim Motor, Volvo# 897720-11 API Marine API Tilt Trim Motors - TILT/TRIM MOTOR, VOLVO# 897720-11
|
|
|
Bennett
12" x 18" Edgemount Kit with Tactile Switch
Product Available:
YES
Sku Number:
MP63524075
Manufacturer ID:
TT12X18E
UPC Number:
|
$
689.94 |
|
|
12" x 18" Edgemount Kit with Tactile Switch Edge MountMounts the actuator at the trailing edge of the plane, requiring 4" less transom height than standard mountTrim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down12-gauge (2.6 mm) laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware
|
|
|
Bennett-Trim-Tabs
Auto Tab Retractor Auto Tab Retractor, 12 Volt
Product Available:
YES
Sku Number:
MP80820584
Manufacturer ID:
AR512
UPC Number:
666285220009 |
$
74.94 |
|
|
Auto Tab Retractor Auto Tab Retractor, 12 Volt Bennett Auto Tab Retractor - AUTO TAB RETRACTOR, 12 VOLT
|
|
|
Lenco-Marine
"Trim Tab Kit 48"" x 9"" w/ Euro Rocker Switch"
Product Available:
YES
Sku Number:
MP63509507
Manufacturer ID:
489E
UPC Number:
|
$
790.94 |
|
|
"Trim Tab Kit 48"" x 9"" w/ Euro Rocker Switch Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.Standard Trim Tab KitBennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. The Euro-Style Rocker Switch is included with these trim tab sets. Kits are complete with all the necessary components for installation."
|
|
|
Lenco-Marine
"9"" x 9"" Racing Tab Kit with Tactile Switch"
Product Available:
YES
Sku Number:
MP63506119
Manufacturer ID:
RT9X9
UPC Number:
|
$
674.94 |
|
|
"9"" x 9"" Racing Tab Kit with Tactile Switch Racing TabsStandard DutyStandard actuator with 5/16" stainless steel through bolts. 1" turned up edges with 2" taper on the inside. All 12-gauge 304 stainless steel construction with black powder coating.We make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's RT series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?All stainless steel construction (no dissimilar metals), sand blasting and powder coated for long lasting good looksActuator speed is precise and controllable so there are no surprises at top speedsActuatorsInstant responseFully submersible, maintenance-free and sealed for lifeHigh-impact, 50% glass fiber-filled, ultrabiolet-resistant nylon caseEach kit contains:2 actuators with stainless steel mounting bolts2 trim tab planesstainless steel mounting screws"
|
|
|
Lenco-Marine
"Standard Trim Tab Kits Trim Tab Kit 9X12"" W/O Switch"
Product Available:
YES
Sku Number:
MP81125376
Manufacturer ID:
15001-101
UPC Number:
155093 |
$
517.94 |
|
|
"Standard Trim Tab Kits Trim Tab Kit 9X12"" W/O Switch Lenco Marine Inc Standard Trim Tab Kits - TRIM TAB KIT 9X12"" W/O SWITCH"
|
|
|
Boat-Leveler-Co
"12"" x 30"" Super Strong Trim Tab Kit with Indicator Switch"
Product Available:
YES
Sku Number:
MP63524089
Manufacturer ID:
TT12X30SSI
UPC Number:
|
$
1437.94 |
|
|
"12"" x 30"" Super Strong Trim Tab Kit with Indicator Switch Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.Instant response electric actuators for precise controlEverything is fully submersible, maintenance-free and sealed for lifeSelf-locking ballscrew will not drift, even while backing down12-gauge (2.6 mm) laser cut stainless steel trim tab planesHigh-impact corrosion-proof mounts look great through years of abuseClean, time and space-saving installationActuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case316 super buff stainless steel ramsEach Kit Includes:2 Actuators2 Stainless steel trim tab planesAll stainless steel mounting hardware"
|
|
|
Bennett
"12"" x 11"" Trim Tab Set"
Product Available:
YES
Sku Number:
MP63509279
Manufacturer ID:
N121100
UPC Number:
000000162159 |
$
523.94 |
|
|
"12"" x 11"" Trim Tab Set Features:WiringColor-coded wiring in 25' to 40' lengths with quick connects fittings, meets federal standards for heat, pull and insulation, making installation easy.SolenoidsThey are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type hose fittings provide tight, secure connections.MotorA powerhouse with coated wirings and a thermal overload that resists temperature and amperage build-up. 1 3/4" stack windings and top mounting eliminated oil leakage. The motor is mounted with stainless steel nuts and bolts, and is easily disassembled.BracketsSwivel type brackets allow cylinders to be mounted an adjusted to any angle. Knockout pins act as shear pins it tab strikes an object.PumpDesigned and engineered exclusively by Instatrim. The built-in bypass is factory set at 400 P.S.I. tolerance held to .00025. Amperage doesn't exceed 16 because the unit circulates oil, rather than stalling out or trying to pump additional pressure.Motor Cover4 1/2" D x 6" W x 11"H, high impact ABS plastic cover with a built-in oil reservoir mounts easily with two screws. The filler is located in front. Our cover protects the motor from occasional wash down. CylindersImpact resistant, fiberglass reinforced nylon cylinders eliminates expansion and resists ultra-violet rays. Two expanding type seals, plus O-ring, eliminates high and low pressure leaks. Barbed cylinder fitting and an inserted tubular rod prevents hose blow-off and breakage. A stainless steel spring retracts the cylinder when the boat is not in motion.Trim Tabs12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim's hinges prevent most spray and can be used for transom or bottom mounting.HoseDesigned and manufactured exclusively for Insta-Trim with nylon-reinforced webbing and protective PVC coating. Rated at 2000 lb. burst pressure, 15' of hose is supplied for your system. Entering the transom 6" above the water line, the hoses are held securely with hose trim.Stainless steel clamps hold the hose to barb fitting at the solenoid. Rocker Type ControlsMounted on the dash they are easy to operate. 2TP Micro switch with silver contact points adjust the tabs for maximum control and performance.One pint of Insta-Trim biodegradable transmission oil, funnel and mounting hardware is supplied."
|
|
|
Bennett-Trim-Tabs
Hinges Pin Only For Lower Hinge
Product Available:
YES
Sku Number:
MP80820573
Manufacturer ID:
A1115
UPC Number:
666285315804 |
$
1.82 |
|
|
Hinges Pin Only For Lower Hinge Bennett Hinges - PIN ONLY FOR LOWER HINGE
|
|
|
Lenco-Marine
"Trim Tab Kit 30"" x 12"" w/ Euro Rocker Switch"
Product Available:
YES
Sku Number:
MP63509503
Manufacturer ID:
3012E
UPC Number:
|
$
707.94 |
|
|
"Trim Tab Kit 30"" x 12"" w/ Euro Rocker Switch Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service.Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.Standard Trim Tab KitBennett Standard Trim Tab Kits are ideal for cruisers who want to optimize performance over a broad range of sea conditions. The Euro-Style Rocker Switch is included with these trim tab sets. Kits are complete with all the necessary components for installation."
|
|
|
Lenco-Marine
Tactile TNT Controller with L.E.D. Indicators and Retractor for Troll'n Tabs
Product Available:
YES
Sku Number:
MP63816760
Manufacturer ID:
123TNT
UPC Number:
874847001427 |
$
341.94 |
|
|
Tactile TNT Controller with L.E.D. Indicators and Retractor for Troll'n Tabs Tactile SwitchesStandard Tactile Switch for all trim tabs and Troll'n TabsFeatures:Self-contained, sealed keypadSelf-contained, sealed control box moduleFade/smudge-proof, laser engraved graphicsPlug & play switch wiring harness connectorBuilt-in retract feature returns tabs to a fully retracted position when power is removed2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all timesPhoto eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight24-volt compatibilityThe Lenco indicator switch is the most advanced trim tab switch available. The switch itself is completely waterproof, and has an over-molded connector to eliminate water intrusion. L.E.D. indicator lights let you know exactly where our trim tabs are at all times.A photochromic eye automatically adjusts the level of light intensity, allowing better visibility of the entire switch in direct sunlight. The indicator switch also come with out retract feature. (Just a little extra piece of mind.)The standard tactile switch is built to all the same exacting standards as the indicator. Our tactile switch has long been a vital part of what makes Lenco's trim tabs the best. We may call it a "Standard switch", but it's much more than that to us.
|
|
|
Bennett-Trim-Tabs
"9"" x 30"" Standard Trim Tab Kit with Indicator Switch"
Product Available:
YES
Sku Number:
MP63524065
Manufacturer ID:
TT9X30I
UPC Number:
|
$
912.94 |
|
| |
